Display; First Use; Set The Water Softener - Electrolux ESL 68060 User Manual

6 electrolux

Display

1 The little bars show the progress of the washing programme.
2 Messages show in this part of the display.
3 Symbols
DELAY START - symbol flashes when countdown is in progress.
MULTITAB - comes on when the function is active.
SAVE ENERGY - comes on when the function is set.
SOUND VOLUME - comes on when the audible signals are deactivated.

First use

Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level

Set the water softener

The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
Downloaded from DishWasher-Manual.com Manuals
Symbols
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: '3 in 1', '4 in 1', '5 in
1' etc. set the multitab function. (Re-
fer to 'Multitab function').
The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.