Use Of Detergent And Rinse Aid; Multitab Function - Electrolux GA60SLV220 User Manual

When it is necessary to fill the salt contain-
er, the display shows the message REFILL
SALT . The message does not show while a
washing programme operates.
After you fill the salt container, the display
can continue to show the message for

USE OF DETERGENT AND RINSE AID

1 2
30
20
7
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Obey the instructions on the detergent
packaging.
How to fill the detergent dispenser:
1. Press the release button
7
lid of the detergent dispenser.
2. Put the detergent in the dispenser
3. If the washing programme has a pre-
wash phase, put a small quantity of de-
tergent on the inner part of the appli-
ance door.
4. If you use the detergent tablets, put the
tablet in the detergent dispenser
5. Close the detergent dispenser. Press
the lid until it locks into position.
Use long washing programmes when
you use the detergent tablets. These

MULTITAB FUNCTION

The multitab function is for combi detergent
tablets.
3 4
A
-
+
6
5
2
to open the
1
.
1
.
some hours. This does not have an unwan-
ted effect on the operation of the appliance
It is correct that water comes out from
the salt container when you fill it with
salt.
cannot fully dissolve with short washing
programmes and can decrease the
washing results.
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
phase.
Do these steps to fill the rinse aid dispens-
er:
1. Press the release button
5
lid of the rinse aid dispenser.
2. Fill the rinse aid dispenser
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the washing programme.
4. Close the rinse aid dispenser. Press the
lid until it locks into position.
When it is necessary to fill the rinse aid dis-
penser, the display shows the message
REFILL RINSE AID . The message does not
show while a washing programme oper-
ates.
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
decrease the dosage.
electrolux 65
6
to open the
3
with rinse
4
to increase or