Comfort Adjustments; Seat Height And Seat Angle Adjustment; To Change The Euro Seat Height; To Change The Contour Seat Height - Pride Mobility JAZZY 1122 Owner's Manual

V . C O M F O R T

COMFORT ADJUSTMENTS

After becoming familiar with your power chair's operation, you may find the need to make some adjustments to
increase your comfort, such as seat height and angle, armrest width, armrest angle and height, controller position,
and foot platform height, depth, and angle.
NOTE: If your power chair is equipped with a Synergy Seat or TRU-Balance Power Positioning
System, refer to the information provided in separate manuals. If your power chair is equipped with a
Euro Seat, medium-back contour seat, or high-back contour seat, refer to the following information.
WARNING!
configured at your authorised Pride Provider
or service centre, please consult your
healthcare professional before changing the
s e a t p o s i t i o n o r m a k i n g a n y o t h e r
adjustment.
degrade your power chair's performance and
safety by changing its centre of gravity.
WARNING! Some power chair components
are heavy. Please refer to the specification
table for specific component weights before
you disassemble the power chair.
WARNING! Remove the occupant from the
power chair before making any adjustment.
You may need the following to make comfort adjustments:
! thread lock
! metric/standard socket set and ratchet
! adjustable spanner

Seat Height and Seat Angle Adjustment

You can change the seat height to several positions by ad-
justing the seat tower position.

To change the Euro Seat height:

1. Remove the retaining clip from each seat mount con-
nector. See figure 14.
2. Raise or lower each seat tower to the desired position
and secure with a retaiing clip.
NOTE: To change the seat angle (dump), set either
the front or rear posts higher or lower than the other.

To change the Contour Seat height:

1. Turn off the power to the controller.
2. Unplug the controller connector from the electronics tray.
3. Flip up the seat latch safety. See figure 19.
4. Squeeze the seat latch and release the seat from the
front trapeze bar.
Jazzy 1122
If your power chair
Some adjustments may
www.pridemobility.com
A D J U S T M E N T S
was
Figure 19. Seat Latch Safety (Disengaged)
TRAPEZE BARS
BALL DETENT PINS
Figure 20. Contour Seat Height Adjustment
QUICK-RELEASE PINS
SEAT TOWER
23