Entering The Memory Mode - Lifescan One Touch Basic Plus Diabetes Monitoring System Owner's Booklet

Entering the Memory Mode

Turn the meter on by pressing the
on/off button. You can access the
meter's memory and recall test
results at any time before or after
performing a test by pressing the
M button.
M C C
M
C C
The word memory with the memory
symbol will appear briefly.
If you are using the meter for the
very first time and have not used it
for testing, or if you have used a
software program to clear the meter's
memory, the following message will
appear, indicating that there are no
results stored in the memory:
35