Entering Set-Up Mode; Setting The Time And Date - Lifescan SureStep Owner's Booklet

Entering Set-Up Mode

1. Make sure the meter is off.
2. Press and hold down the green
C button.
3. Press and release the blue
power button while holding
the green C button.
4. Release the green C button.
Each setting flashes on the display
until you press the blue power button
to move to the next feature. While it
flashes, the setting may be changed by
pressing the green C button. After
the last feature is displayed, the
meter turns off when you press the
blue power button. To move quickly
through the features, press the blue
power button repeatedly or press
and hold it to scroll.

Setting the Time and Date

The SureStep
Green C Button
nal clock that will record the time
Blue
and date of each test you perform.
Power
You may need to change the time
Button
setting in your meter to have the
correct time and date appear with
your test result. You also will need
to reset the time whenever there
is a change to or from daylight
saving time. (The accuracy of your
55
Meter has an inter-
®