One Touch Basic Plus; Blood Glucose Meter - Lifescan One Touch Basic Plus Diabetes Monitoring System Owner's Booklet

ONE TOUCH

Blood Glucose Meter

Study this diagram and become
familiar with all the parts of your
ONE TOUCH BASIC
™
M BUTTON
The ONE TOUCH BASIC Plus
Meter automatically stores your test
results. Use the M button to recall
the information stored in your
meter's memory and to review
your meter's option settings.
DATA PORT
Allows you to transfer the
information stored in the meter's
memory to a computer to view,
analyze, and print.
TEST STRIP HOLDER
The test strip holder holds a
ONE TOUCH Test Strip in
™
place when you perform a
blood glucose or control
solution test. It must be
removed to clean the meter.
BASIC Plus
™ ™
Plus Meter.
™
BATTERY COMPARTMENT
Holds two AAA batteries. The batteries
are already installed in your meter.
C
M
M
5
DISPLAY
The large, easy-to-read display
is where you read the simple
messages that guide you
through testing. Your test
results are displayed here.
ON/OFF BUTTON
This button turns the meter on
and off.
C BUTTON
Use the C button to change
the option settings on the
C
ONE TOUCH BASIC Plus Meter.
TEST AREA
The test area is located under the
test strip holder. There is a clear,
protective coating over the test area
that must be kept clean and
undamaged for accurate results.
(on back)