Doing a Daily Check
Look through the small hole in the
test strip holder to make sure there is
no lint, dirt, or blood blocking it.
If there is anything blocking the hole,
or if the test area has dirt, lint, or
blood on it, remove the test strip
holder and clean the test area by
following the instructions in the next
section. Then do a check strip test
(see page 12).
Cleaning the Meter
Clean the meter and test strip holder:
At least once each week
Whenever the test area looks dirty
Whenever
appears on the display
60
clean
test
area
Need help?
Do you have a question about the One Touch Basic Plus Diabetes Monitoring System and is the answer not in the manual?
Questions and answers