Viewing Your Meter Memory - Lifescan FreeStyle Owner's Booklet

Viewing Your Meter Memory

Getting In and Out of Memory
• To Enter
Start with the meter off (and no test strip inserted). Press the "m"
button and release; the first memory screen to appear will be your
14-day average.
• To Exit at Any Time
Press and hold the "m" button until the meter powers off.
14-Day Average
The first memory display screen you see is your 14-day average. This
includes all the readings from the last 14 days starting from the current
date and time shown on the meter. (Control solution, LO, and HI
readings are not included in the average.)
14d avg = your 14-day average
n = indicates the number of results
included in your 14-day average.
43
Call Customer Service Toll Free at 1-888-522-5226 www.therasense.com
Working the Memory
The meter stores the last 250 test readings with time and date. You
may scroll through all of the readings by pressing and holding the "c"
button. The first reading you see is the most recent result. As you
continue to push the "c" button the meter will scroll back to older
readings. Eventually it will scroll to the most recent reading again.
Blood Glucose Test
A result without a control solution symbol (
indicates that it is a blood glucose reading. The
date and time of the test will appear on the bottom
of the screen.
Control Solution Test
A value with (
this reading as a control solution test (refer to page
20). This result is not included in your 14-day
average. The date and time of the control solution
reading will appear on the bottom of the screen.
LifeScan, Inc.. Ex. 1010 - Page 26
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00712 - U.S. Patent No. 8,840,635
)
) indicates that you have marked
44