Meter Set-Up; Entering Basic Set-Up Mode - Lifescan UltraSmart Owner's Booklet

METER SET-UP

Note:
• You need not change any of the meter settings in order to
begin testing. Simply insert a test strip to turn on the
meter and proceed with the test. (See pages 19–35.)
• It is important that the time of day is correct and that your
medication set up and mealtimes are set according to
your personal daily schedule. Otherwise, some FastFacts
information will not be correct.
®
The OneTouch
the date, time and display language. The glucose units are preset
at the factory and cannot be changed. You must enter Set-up
mode to:
• Change the date, time, or display language. (Glucose units
cannot be changed.)
• Customize the meter features that allow you to track
diabetes pills, insulin doses, and insulin pump information.
• Customize advanced features such as averages, meal
schedule, target glucose range, and hypoglycaemia level.

Entering Basic Set-up Mode

To enter Set-up mode, press and hold down the Back
button
three seconds.
™
UltraSmart Meter was preset at the factory with
and the OK button at the same time for
OK
54
™