Zoom led par bar with wireless foot control (10 pages)
Summary of Contents for Qtx LED DERBY III
Page 1
LED DERBY III Item ref: 151.577UK User Manual RGBW Light Effect...
Page 2
Introduction Thank you for choosing the QTX LED DERBY III quad colour multi-point effect as part of your lighting rig. Please read these instructions in full to gain the best results from this item and avoid damage to the unit.
Setting up Install the LED DERBY III so that the front panel is facing the area to be lighted. Experiment with positioning to get the best coverage from the multi-beam array. Connect mains using an appropriate IEC lead to the mains inlet Operation The LED DERBY III operates as a stand-alone unit in either auto or sound-activated modes.
Specifications Power supply 240Vac 50Hz (IEC) Power consumption Operating modes Auto, Sound activated LED sources 8 x 3W LED (2 x Red, 2 x green, 2 x blue, 2 x white) Controls Power on/off, Mic. Sensitivity, dip switches 1-10 Dimensions 295 x 160 x 275mm (inc.