Advertisement
Specifications
Power supply
Power consumption
Operating modes
LED sources
Controls
Dimensions
Weight
Troubleshooting
No power
No light output
No sound activation
Light output is dim
Overheating/cutting
out
Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines
240Vac 50Hz (IEC)
40W
Auto, Sound activated
8 x 3W LED (2 x Red, 2 x green, 2 x blue, 2 x white)
Power on/off, Mic. Sensitivity, dip switches 1-10
295 x 160 x 275mm (inc. bracket)
3.85kg
Check mains voltage is correct and outlet is switched on
Check IEC lead and mains fuse (if fuse continually blows, refer to your dealer)
Check rear panel dip switch settings (8 on its own gives no LED output)
Check that dip switch 9 is switched to "on"
Check rotary control for microphone sound sensitivity is not fully down (left)
Make sure front panel optics are clean and clear of debris
Ensure that the unit is not too close to a heat source
Ensure that the cooling vent on the rear panel is clear and not covered
Errors and omissions excepted.
Copyright © 2013. AVSL Goup Ltd
151.577UK User Manual
Advertisement
