Advertisement
Quick Links
TECHNICAL SPECIFICATION:
Voltage : 110-240Vac, 50Hz
LED Type : 30W LED 6000K
Beam Angle: 12°
Pan Range: 0-540°
Dimensions : 180 x 170 x 270mm
DISPOSAL:
Please disposal of the unserviceable device according to the current statutory
requirement
Errors and omissions excepted.
Copyright© 2012. AVSL Group Ltd.
Power Consumption: 80W
Fuse: F3A
LED Lifespan: 10,000hrs
Tilt Range: 0-270°
Weight: 2.8kg
150.443UK User Manual
30W LED MINI MOVING HEAD SPOT
Order ref: 150.443UK
VERSION 1.0
MHS-30
User Manual
Advertisement
Related Manuals for Qtx MHS-30
Summary of Contents for Qtx MHS-30
- Page 1 TECHNICAL SPECIFICATION: MHS-30 30W LED MINI MOVING HEAD SPOT Voltage : 110-240Vac, 50Hz Power Consumption: 80W LED Type : 30W LED 6000K Fuse: F3A Order ref: 150.443UK Beam Angle: 12° LED Lifespan: 10,000hrs User Manual Pan Range: 0-540° Tilt Range: 0-270°...
- Page 2 Cont. 000-009 White 010-019 020-029 Green 030-039 Yellow 040-049 Blue 050-059 Pink 060-069 Orange 070-079 Purple 080-089 Magenta 090-099 100-109 UV + White CH 4 110-119 UV + Magenta 120-129 Magenta + Purple 130-139 Purple + Orange 140-149 Orange + Pink 150-159 Pink + Blue 160-169...
-
Page 3: Dmx Operation
DMX OPERATION: INTRODUCTION: MHS-30 MINI MOVING HEAD SPOT 30W Function Description Channel Value This compact and lightweight mini moving head uses a powerful 30W white LED. It Blackout CH 1 has a 12° beam angle and features 9 gobos (plus spot) and 9 colour wheel (plus... -
Page 4: Package Contents
LED Display Action Addr Set DMX Address Aut1: For Floor operation, Pan is not restricted MHS-30 Moving head x 1pcs User’s Guide x 1pcs Tilt movement is restricted to 210°. Power Cord x 1pcs 1 x Mounting brackets Aut2: When using on the ceiling. Pan is not restricted Tilt movement is restricted to 90°... -
Page 5: Rear Layout
CAUTION! TO PREVENT MORTAL ELECTRICAL RISK AND LONG LIFE OPERATION: REAR LAYOUT: For your safety, please kindly pay attention to all of the warnings listed below: Always plug in the power plug last and disconnect from the mains, when the device is not in use or before cleaning. -
Page 6: General Maintenance
CONNECT WITH POWER SUPPLY – THE GROUND WIRE MUST BE CONNECTED: GENERAL MAINTENANCE Use the plug to connect to the main power supply as follows: To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month.