Inserting An Item Into The Scanner - Digital Check CheXpress CX30 User Manual

®
CheXpress CX30 User Manual
Rev 041715

Inserting an Item into the Scanner

The manual "drop and slide" style feeder takes just one item at a time. Use the following directions:
Step 1: Remove all rubber bands, staples, paper clips, pins, etc.
Step 2: Load the item by sliding it into the 'Entry Tray' with the front of the item facing out and away from the
scanner.
Step 3: Items must be inserted flat into the 'Entry Tray' and slide forward until they stop or are pulled into the
scanner.
 The status LED should momentarily turn 'Orange' just before the item is pulled into the scanner.
Note: Depending upon the scan mode selected by the application and the open or closed position of the exit
door, the document will either scan through the unit and stop in the exit door or scan and return back to the
'Entry Tray' for easy removal.
Page | 16