Advertisement
There are 3 different types to connect internet, please select an appropriate type to fit your network
environment.
1. STATIC (FIXED) IP: Input IP address, subnet mask, gateway and DNS server manually.
2. DHCP : Check the "Obtain IP address automatically", the device will acquire IP address, subnet mask,
gateway and DNS service.
3. PPPOE : input the user name and password from ISP provider.
No matter which type you use, please click "Test" before you click "Apply" to make the setting work.
Definitions and descriptions of network configuration:
Parameter
HTTP port
Server port
IP address
Subnet mask
Gateway
DNS server
User name
Password
DDNS server
User name
Password
3.6.2 Network stream
Step1: enter into system configurationnetwork configurationsub stream; refer to Fig 4-32:
Step2: select fps, resolution, quality, encode and max bit rate
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.
Definitions and descriptions of network stream:
The port number of accessing IE browser. The default
port is 80
The port number of data. The default port is 6036
Static IP
The IP address of the server
The subnet mask of the server
The gateway of the server
The address of DNS server
PPPOE
User name of broad band dial-up
Password of broad band dial-up
DDNS server
Website provided by dynamic domain name supplier. The
optional: www.meibu.com，www.dyndns.com
User name for log in the website of domain name
supplier
Password for log in the website of domain name supplier
8CH
Fig 4-32 network configuration-sub stream
25
Meaning
Advertisement
