Advertisement
Step2: select split mode: 1×1、2×2、2×3、3×3、4×4 and channel
Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display
Step4: selected the split mode, then setup current picture group. Click
channel groups of dwell picture, click
Step5: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.
3.2.3 Mask
User can setup private mask area on the live image picture, max threes areas.
Setup mask area: click Setting button, enter into live image to press left mouse and drag mouse to set mask
area, refer to below picture. Click Apply button to save the setting.
Delete mask area: select a certain mask area, click left mouse to delete that mask area, click Apply button to
save the setting.
Notice: The mask area will not be recorded on DVR. Please use this function carefully.
button to set the latter channel groups of dwell picture.
Fig 4-10 live configuration-mask
Setup mask area
Live image mask area
15
button to setup the previous
Advertisement
