Okina B00PVFKGS0 User Manual page 23

Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for
details.
3.5.3 Video loss
Step1: enter into system configurationalarm configurationvideo loss; refer to Fig 4-25:
Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1
Sensor alarm handling for more details.
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit"
button to exit current interface.
3.5.4 Other alarm
Step1: enter into system configurationother alarm; refer to Fig 4-26:
Step2: select a hard disk in the pull down list box, when the disk capacity is lower than that value, there will
appear some text information on the lower right of the live image.
Step3: click "default" button to resort default setting; click "apply" button to save the setting; click "exit"
button to exit current interface.
Fig3-24 alarm configuration-schedule
Fig 4-25 alarm configuration-video loss
Fig4-26 other alarm
23