Okina B00PVFKGS0 User Manual page 16

Record configuration
3.3
Record configuration includes five sub menus: enable, record bit rate, time, recycle record and stamp.
3.3.1 Enable
Step1: enter into system configurationrecord configurationenable; refer to Fig 4-11:
Step2: tick off record, audio and record time
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
Definitions and descriptions of Record:
Parameter
Record
Audio
3.3.2 Record stream
Step1: enter into system configurationrecord configurationrecord bit rate
Step2: setup rate, resolution, quality, encode and max bit stream
Step3: user can setup all channels with same parameters, tick off "All", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.
Fig 4-11 record configuration-enable
to exit current interface.
Record switch of every channels
Enable live record audio
16
Meaning