Advertisement
Note: if the rate value set is over high the maximum resources of the device, the value will be
adjusted automatically.
Definitions and descriptions of Record stream:
Parameter
Resolution
FPS
Quality
Encode
Max bit stream
3.3.3 Time
Step1: enter into system configurationrecord configuration time; refer to Fig 4-12:
Pre-alarm record time: the record time before event happen i.e. record time before motion detection or
sensor alarm is triggered.
Post-alarm record: set the post recording time after the alarm is finished, five options: 10s、15s、20s、30s
and 60s.
Expire time: the hold time of saved records. If the set date is overdue, the record files will be deleted
automatically.
Step2: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step3: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.
Support 1080P,
4/8/16 CH HD DVR 1080P@30FPS(25FPS)
The quality of recorded images. The higher the value is, the
clearer the recorded image is. Six options: lowest, lower,
low, medium, higher and highest.
VBR and CBR
Range from 1536kbps~12288kbps
Fig 4-12 record configuration-time
17
Meaning
Advertisement
