Using your remote control
Power on and off
Make sure that the TV power cable has been plugged into a wall power outlet, and the
outlet has been switched on (if there is a switch).
Power on the TV
When TV is plugged into a outlet, the power indicator will light up orange, which
indicates the TV is in off mode. Press 电源
will turn on with the power indicator light turning into blue.
Put the TV to off mode
Press 电源
again on the remote control, and the TV will enter into the off mode with
the power indicator light turning into orange.
Switch inputs
1. Turn on all connected equipments or devices before selecting an input.
2. Press the 信号源 button on the remote control to display signal input interface (as
shown below).
3. Continue to press the 信号源 button to circulate the signal input, or press the / and
确认 buttons to select the signal source.
Adjust the audio settings
Adjust the volume
•
Press VOL + on the TV, or 音量+ on the remote control to raise the volume. An
volume bar will be shown on your screen and increased in its length as you raise the
volume.
•
Press VOL - on the TV, or 音量- on the remote control to lower the volume. An
volume bar will be shown on your screen and decreased in its length as you lower the
volume.
Mute Setting
Press 静音
once on the remote control to turn off the audio temporarily. Press 静音
again, or press 音量+/音量- to restore the audio output.
Select TV/Video sound mode
•
When watching TV, you can press the Sound Mode button on the remote control to
switch to "Standard", "User", "Movie" or "Music" modes.
The available options will be depend on what your local TV system or your Video input
provides.
once on the remote control, and the TV
13