Table of Contents
Advertisement
4. Connect the antenna cable
Connect the TV antenna cable from your TV antenna system or Cable TV (CATV) to the
TV IN on the back of your TV. Check and make sure that the cable connections are
fi rmly in place.
•
Poor signal receiption by the antenna will result in poor picture and/or sound quality on
your TV. To get the best quality picture and sound, an outdoor TV antenna system that
is properly aligned will be required. Please consult with an antenna specialist for the
requirement.
•
This TV has a built-in analog TV tuner, which allows the connection from a traditional
analog TV antenna system. To receive digital TV programs, you will need to connect your
TV to an external digital TV tuner (decoder), or a digital set top box (STB).
5. Connect the power cable
1. Take out the power cable from the packaging, plug one end of the cable into the AC
POWER IN on the back of the TV (as shown below).
2. Connect the other end into an appropriate wall power outlet, and switch on the outlet (if
required). This will put the TV into off mode with the power indicator at button right of
the screen lights in orange.
•
The power cable and the outlet shown above may appear different to yours depending on
your region.
•
Only use a power cable designed for your region. Never use a power cable damaged or
frayed. Never change the plug head of your power cable. Be aware of overload when
using extension cords or multiple outlet power boards.
•
There are no user serviceable parts in this TV. Never unscrew or remove any covers from
it.
•
The supplied power cord is suitable for use with 100-240V AC power only.
•
The type of power cord plug and jack illustrated may differ from the type used in your
region.
•
Only use an appropriate power cord for your region. Never use a power cord which
appears damaged or frayed, or change the plug type on the power cord.
•
Be aware of the total loading when using extension cords or multiple outlet power boards.
•
This TV has no power switch. When installing the TV, incorporate a readily accessible
disconnect device in the fi xed wiring, or connect the power cord to socket-outlet which
must be provided near the TV and easily accessible. If a fault should occur during
operation of the unit, operate the disconnect device to switch the power supply off, or
disconnect the power cord.
•
Warning: This TV has been engineered and manufactured with the highest priority on safety,
however, improper handling or use can result in potential electrical shock or fi re hazard.
•
This TV has been engineered and manufactured with the highest priority on safety, however,
IMPROPER HANDLING OR USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARD. Please handle this TV with care. If damaged, turn off the power and unplug
the power cord from the TV. Transport the TV to your nearest BenQ authorized service
centre for repair.
•
There are no user serviceable parts in this TV. Never unscrew or remove any covers. There
are dangerous voltages inside. Turn off the power and unplug the power cord before moving
the TV.
4
Advertisement
Table of Contents
