Kenwood TS-480HX Setting Manual page 23

Operations There are so many limitations. Can
this system operate?
Audio transmissions are noisy or
small. Where should I check and
adjust?
The operation of the transceiver is
possible, but sounds do not pass.
The sound breaks off for an instant,
periodically.
Question
22
Answer
Although different from normal
operations, considerably practical
operations are possible in ordinary
communications.
There may be some initial confusion
over the standby timing until you are
familiar with the specific delays via the
network.
We recommend first becoming familiar
with the transceiver operations from the
PC using a single ARCP-480, and then
attempting operations on a network
environment as the next step.
When attempting actual operations,
unless operating with a partner, the
internet remote operation is hard to
understand.
Adjust the DATA audio level in menus
46 and 47.
Try changing the sound function driver
version.
If using the sound functions in
comprehensive chipsets, try an
independent sound card or USB sound.
Sound Blaster 16 or higher is
recommended.
Try changing the sound function driver
version. It is confirmed that whether
sound is passed or not depends on the
version of the sound functions driver.
If using the sound functions in
comprehensive chipsets, try an
independent sound card or USB sound.
Sound Blaster 16 or higher is
recommended.