Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zycoo CooFone-D30
Summary of Contents for Zycoo CooFone-D30
-
Page 2: Safety Notices
Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device. Please use the external power supply that is included in the package. Other power supplies may cause damage to the phone, affect the behavior or induce noise. -
Page 3: Table Of Contents
Table of Content Chapter 1 Brief Introduction to D30(P) ..............1 Thank you for Purchasing D30(P) ....................1 Delivery Content ..........................1 Specifications ........................... 2 Voice Features ..........................2 Network Features ..........................3 Maintenance and Management ......................3 Keypad ............................. 4 Port for Connecting........................... - Page 4 Dial Peer ............................13 Auto Redial ............................. 13 Call Completion ..........................14 4.10 Power Light ..........................14 4.11 Hide DTMF ..........................14 4.12 Password Dial ..........................14 4.13 Action URL & Active URI ......................14 4.14 Push XML ........................... 15 Chapter 5 Basic Settings ..................
-
Page 5: Chapter 1 Brief Introduction To D30(P)
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 1 Brief Introduction to D30(P) 1.1 Thank you for Purchasing D30(P) Thank you for purchasing D30(P). D30(P) is an entry level IP Phone which is designed for junior employees or middle managers specially for promoting productivity and efficiency in daily working environment. -
Page 6: Specifications
Copyright ©ZYCOO All rights reserved. V1.0 1.3 Specifications Item D30(P) Adapter Input: 100-240V, Output: 5V 1A 10/100Base- T RJ-45 1 Port Port 10/100Base- T RJ-45 1 Port Power Consumption Idle: 2.5W, Active: 2.8W LCD Size 128x48 pixels, 62 x 22mm... -
Page 7: Network Features
Copyright ©ZYCOO All rights reserved. V1.0 Support MWI Support XML phonebook/browser Support Speed dial Support SRTP Code synchronization via IP PBX/IMS Support click to dial via web phone book Voice codec setting for each SIP line ... -
Page 8: Keypad
Copyright ©ZYCOO All rights reserved. V1.0 1.7 Keypad Key name Function Description Navigation Navigation key assist users for operating more conveniently In the hook off/hands-free mode, use the key to dial the last call number In stand-by mode, it has a function to check the Outgoing Call... -
Page 9: Icon Introduction
Copyright ©ZYCOO All rights reserved. V1.0 Headset Port type: RJ-9 connector 1.9 Icon Introduction Icon Description Call out Call in Call hold Auto answer Call mute Contact DND(Do not Disturb) In hand-free mode In hook mode Missed call Call forward 1.10 LED Status Introduction... -
Page 10: Chapter 2 Initial Connecting And Settings
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 2 Initial Connecting and Settings 2.1 Connect the Power and Network 2.1.1 Connect to Network Notice: The following instructions will take D30 as reference, features of D30 is same as D30P. D30P supports one more function of PoE. -
Page 11: Power Adapter Connection
Copyright ©ZYCOO All rights reserved. V1.0 3. Work as a broadband router D30 supports broadband routing. When D30 is connected to WAN port of the broadband modem and your computer or other Internet-capable device is connected to LAN port of D30, you can use the phone through Internet broadband routing. - Page 12 Copyright ©ZYCOO All rights reserved. V1.0 4. The screen will show the current information. Press 【Del】 to delete it, then input your PPPoE username and password and press 【Save】. 5. Press 【Back】 six(6) times to return to the idle screen.
-
Page 13: Chapter 3 Basic Function
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 3 Basic Function Making a Call 3.1.1 Call Device You can make a phone call via the following devices: Pick up the handset,， icon will be shown in the idle screen. Press the Speaker button,，... -
Page 14: Dnd
Copyright ©ZYCOO All rights reserved. V1.0 1. If User is not on another phone, lift the handset to use, or press the Speaker button/ Answer softkey to answer using the speaker phone, or press the headset button to answer the headset. -
Page 15: Call Transfer
Copyright ©ZYCOO All rights reserved. V1.0 Call Transfer 3.6.1 Blind Transfer During talking, press key Transf, and dial the number that you want to transfer, and finish by pressing # key. The current call will be transferred to the third party. After finishing transfer, the call you talk to will be hung up. User cannot select SIP line when call is in transfer. -
Page 16: Chapter 4 Advanced Function
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 4 Advanced Function Click to Dial When user A browses on an appointed Web page, user A can click to call user B via a link (this link to user B), then user A’s phone will ring, after A hooks off, the phone will dial to B. -
Page 17: Memo
Copyright ©ZYCOO All rights reserved. V1.0 4.4.2 Memo You can add some memos to record some important things to remind you. Press Menu->Application->Memo->Enter->Add. There are some options to configure: Mode, Date, Time, text, Ring. When the configuration is completed, press Save. -
Page 18: Call Completion
Copyright ©ZYCOO All rights reserved. V1.0 3. After enable auto redial, calling out someone, if he/she is in busy, it will pop up a prompt box whether to auto redial, press OK, the phone will call out him according the Interval and Times that you set. -
Page 19: Push Xml
Copyright ©ZYCOO All rights reserved. V1.0 2. Active URI，achieve results come from a functional understanding that the remote(eg PC) to send a URL to the phone, the phone received will produce an action, such as dial , DND and so on. Enter the phone web pages PHONE->FEATURE，enter the Active URL limit IP(such as a PC IP) Push XML... -
Page 20: Chapter 5 Basic Settings
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 5 Basic Settings Keyboard 1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Keyboard->Enter. 2. There are four items: DSS Key settings, Programmable Keys, Desktop Long Pressed, Soft Key , You can set up respectively on them. Press the key Enter to the interface, then use the navigation keys to choose the function for the key according to you want. -
Page 21: Languages
Copyright ©ZYCOO All rights reserved. V1.0 Languages 1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Language ->Enter. 2. D30(P) supports three languages, you can use the navigation keys to choose. The default two languages are English and Chinese. -
Page 22: Chapter 6 Advanced Settings
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 6 Advanced Settings 6.1 Accounts Press Menu->Enter->Advanced settings, and then input the password to enter the interface, the default password is 123. You can set it through the web page. Then choose Account then press Enter, you can do some sip settings. -
Page 23: Chapter 7 Web Configuration
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 7 Web Configuration Introduction of configuration 7.1.1 Configuration Ways D30 has three different ways to different users. Use phone keypad. Use web browser (recommendatory way). Use telnet with CLI command. -
Page 24: Configuration Via Web
Copyright ©ZYCOO All rights reserved. V1.0 After you configure the IP phone, you need click【Save】button in CONFIG under Maintenance in the left catalog to save your configuration. Otherwise the phone will lose your modification after power off and on. Configuration via WEB 7.3.1 BASIC... -
Page 25: Wizard
Copyright ©ZYCOO All rights reserved. V1.0 WIZARD 7.3.1.2 Wizard Please select the proper network mode according to the network condition. D30 provides three different network settings: Static IP: If your ISP server provides you the static IP address, please select this mode, and then finish Static Mode setting. - Page 26 Copyright ©ZYCOO All rights reserved. V1.0 Static IP Settings Configuration Table Item Explanation IP Address Input the IP address distributed to you Subnet Mask Input the Net mask distributed to you. IP Gateway Input the Gateway address distributed to you.
- Page 27 Copyright ©ZYCOO All rights reserved. V1.0 DHCP MODE: Same configuration steps as Static IP Mode. E.g.: Click Next can configure SIP (default SIP1) simply. Click【Back】to return to the last page. PPPoE MODE: Same configuration steps as Static IP Mode. E.g.: Click Next can configure SIP (default SIP1) simply.
-
Page 28: Call Log
Copyright ©ZYCOO All rights reserved. V1.0 CALL LOG 7.3.1.3 User can check all the outgoing calls through this page shown below. CALL LOG Item explanation Start Time Display the start time of the outgoing record. Duration Display the conversation time of the outgoing record. -
Page 29: Network
Copyright ©ZYCOO All rights reserved. V1.0 7.3.2 NETWORK 7.3.2.1 WAN Settings WAN Status Active IP Address The current IP address of the phone Curren Subnet Mask The current Net mask address MAC Address The current MAC address of the phone... - Page 30 Copyright ©ZYCOO All rights reserved. V1.0 Please select the proper network mode according to the network condition. D30 provide three different network settings: Static IP: If your ISP server provides you with the static IP address, please select this mode, and then finish Static Mode setting.
- Page 31 Copyright ©ZYCOO All rights reserved. V1.0 Notice: 1) Click “Apply” button after finishing your settings, IP Phone will save the settings automatically and new settings will take effect. 2) If you modify the IP address, the web will not response by the old IP address. You need input new IP address in the address column to logon on the phone.
- Page 32 Copyright ©ZYCOO All rights reserved. V1.0 7.3.2.3 QoS&VLAN The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN functionality can use different VLAN IDs by setting voice VLAN and data VLAN. The VLAN application of this phone is very flexible.
- Page 33 Copyright ©ZYCOO All rights reserved. V1.0 QoS Configuration Table Link Layer Discovery Protocol (LLDP) Settings Enable LLDP Enable LLDP by selecting it. After enabling LLDP Learn, telephone can automatically learn the data of DSCP, 802.1p, VLAN ID from the switch. If the data is different from the data of the LLDP...
- Page 34 Copyright ©ZYCOO All rights reserved. V1.0 7.3.2.4 Service Port You can set the port of Telnet/HTTP/RTP on this page. SERVICE PORT Service Port Settings Web Server Type Specify Web Server Type. Set web browser port, the default is 80 port, if you want to enhance system safety, you'd better change it into non-80 standard port;...
- Page 35 Copyright ©ZYCOO All rights reserved. V1.0 7.3.2.5 DHCP SERVICE DHCP SERVICE Item Explanation IP-MAC mapping table. If the LAN port of the phone connects to a device, this table DHCP Lease Table will show the IP and MAC address of this device.
-
Page 36: Time&Date
Copyright ©ZYCOO All rights reserved. V1.0 Enable DNS Relay Select DNS Relay, the default is enabled. Click the Apply button to become effective. Notice: 1) The size of lease table cannot be larger than the quantity of network IP address. We recommend you to use the default lease table and not modify it. -
Page 37: Voip
Copyright ©ZYCOO All rights reserved. V1.0 TIME&DATE Item Explanation Simple Network Time Protocol (SNTP) Settings Enable SNTP Enable SNTP by selecting it. Enable DHCP Time Enable DHCP Time by selecting it, then the phone will automatically synchronize the standard time. - Page 38 Copyright ©ZYCOO All rights reserved. V1.0...
- Page 39 Copyright ©ZYCOO All rights reserved. V1.0 Item Explanation SIP Configuration SIP Line Choose line to set info about SIP, there are 4 lines to choose. You can switch by【Load】button. Basic Settings Status Shows if the phone has been registered the SIP server or not; or so, show Unapplied.
- Page 40 Copyright ©ZYCOO All rights reserved. V1.0 Proxy User Input your Proxy SIP server account. Proxy Password Input your Proxy SIP server password. Set the sip domain if needed, otherwise this VoIP phone will use the Register Domain Realm server address as sip domain automatically. (Usually it is same with registered server and proxy server IP address).
- Page 41 Copyright ©ZYCOO All rights reserved. V1.0 Session Timeout Set the session timeout. Subscribe for MWI Enable the Subscribe for MWI by selecting it, the phone will send subscribe message for MWI to the SIP Server. MWI Number Specify the MWI Number; Please contact your system administrator for the connecting code.
- Page 42 Copyright ©ZYCOO All rights reserved. V1.0 will turn on the function immediately. When there are calls to the extension, the server will forward it to the set number automatically based the forward type. And the IP phone will not show the record in the call history anymore.
- Page 43 Copyright ©ZYCOO All rights reserved. V1.0 Keep Authentication Enable/Disable Keep Authentication System will take the last authentication field which is passed the authentication by server to the request packet. It will decrease the server’s repeat authorization work, if it is enable.
- Page 44 Copyright ©ZYCOO All rights reserved. V1.0 7.3.4.2 IAX2 IAX2 Config Item explanation Status Shows if the phone has been registered the IAX2 server or not. Server Address Input your IAX2 server address. Server Port Set your IAX2 server port, the default is 4569.
- Page 45 Copyright ©ZYCOO All rights reserved. V1.0 STUN: By STUN server, the phone in private network could know the type of NAT and the NAT mapping IP and port of SIP. The phone might register itself to SIP server with global IP and port to realize the device both calling and being called in private network.
- Page 46 Copyright ©ZYCOO All rights reserved. V1.0 Sip Line Using STUN Choose line to set info about SIP, There are 2 lines to choose. Use STUN Enable/Disable SIP STUN. Notice: SIP STUN is used to realize SIP penetration to NAT. If your phone configures STUN Server IP and Port (default is 3478), and enable SIP Stun, you can use the ordinary SIP Server to realize penetration to NAT.
- Page 47 Copyright ©ZYCOO All rights reserved. V1.0 DIAL PEER Item explanation Phone number There are two types of matching conditions: one is full matching, the other is prefix matching. In the Full matching, you need input your desired phone number in this blank, and then you need dial the phone number to realize calling to what the phone number is mapped.
- Page 48 Copyright ©ZYCOO All rights reserved. V1.0 Examples of different alias application Set by web explanation example You need set phone number, Destination, Alias and Delete Length. Phone number is XXXT; Destination is 255.255.255.255 (0.0.0.2) and Alias is del. If you dial “93333”, the SIP2 This means any phone No.
- Page 49 Copyright ©ZYCOO All rights reserved. V1.0 7.3.4.5 MCAST the multicast function to send notice to every member of the multicast is simple and easy. By setting the multicast key on your phone, you can send multicast RTP flow to the pre-configured multicast address. By listening multicast address is configured on the phone, listen and play the multicast address to send the RTP stream.
-
Page 50: Phone
Copyright ©ZYCOO All rights reserved. V1.0 2、 Press the hold key to hold the current multicast session 3、 Press the end key again or multicast function key, multicast session can be stopped Notice: RTP stream is one side that is from a sender to a receiver. When the phone initiates a multicast RTP session in a call, the current call is on hold. - Page 51 Copyright ©ZYCOO All rights reserved. V1.0 Audio Settings Item explanation First Codec The first preferential DSP codec: G.711A/u, G.722, G.723.1,726-32 G.729AB,None. Second Codec The second preferential DSP codec: G.711A/u, G.722, G.723.1,726-32 G.729AB,None. Third Codec The third preferential DSP codec: G.711A/u, G.722, G.723.1,726-32 G.729AB,None.
- Page 52 Copyright ©ZYCOO All rights reserved. V1.0...
- Page 53 Copyright ©ZYCOO All rights reserved. V1.0 Item explanation Feature Settings Do Not Disturb Select DND, the phone will reject any incoming call, the callers will be reminded by busy, but any outgoing call from the phone will work well. Ban Outgoing If you select Ban Outgoing to enable it, and you cannot dial out any number.
- Page 54 Copyright ©ZYCOO All rights reserved. V1.0 Enable Call Enable Call Completion by selecting it. Completion Enable Pre-Dial Disable this feature, in standby interface next number, will realize the number rules ”send out over the time”;Enable the feature ,then the number will not be send out over the time.
- Page 55 Copyright ©ZYCOO All rights reserved. V1.0 will determine whether to display corresponding content on the phone which sent by the specified server or not. Set Prefix in peer to peer IP call. For example: what you want to dial is 192.168.1.119, If P2P IP Prefix you define P2P IP Prefix as 192.168.1., you dial only #119 to reach 192.168.1.119.
- Page 56 Copyright ©ZYCOO All rights reserved. V1.0 DIAL PLAN Configuration Item explanation Basic Setting Press "#" to Send Set Enable/Disable the phone ended with “#” dial. Dial Fixed Length Specify the Fixed Length of phone ending with. Press # to Do Blind...
- Page 57 Copyright ©ZYCOO All rights reserved. V1.0 Cause extensions 1000-8999 to be dialed immediately. Cause 8 digit numbers started with 9 to be dialed immediately. Cause 911 to be dialed immediately after it is entered. Cause 99 to be dialed after 4 seconds.
- Page 58 Copyright ©ZYCOO All rights reserved. V1.0 Item explanation Phonebook Table Name Shows the name corresponding to the phone number. Shows the detail of current phonebook. Notice: the maximum capability of the phonebook is 500 items, you can select many or a contact to add to group and add to blacklist, and delete many or a contact, and delete all contacts.
-
Page 59: Remote Contact
You need to match a XML Phonebook address and you can directly access to the corresponding remote phonebook on the phone. For example: Set the Phonebook Name as ZYCOO, Server URL is tftp://192.168.1.3/admin/phonebook/index.xml. Or Set the Phonebook Name as ldap, Server URL is ldap://192.168.1.3/dc=winline,dc=com. -
Page 60: Web Dial
Copyright ©ZYCOO All rights reserved. V1.0 Remote Phonebook Setting Phonebook Name Custom the phonebook name displayed on the phone. Server URL Specify the server url of the remote phonebook. SIP Line Specify the sip line for the remote phonebook. Authentication Specify the authentication mode for remote phonebook. - Page 61 Copyright ©ZYCOO All rights reserved. V1.0 Use the multicast function to send notice to every member of the multicast is simple and easy. By setting the multicast key on your phone, you can send multicast RTP flow to the pre-configured multicast address. By listening multicast address is configured on the phone, listen and play the multicast address to send the RTP stream.
-
Page 62: Function Key
Copyright ©ZYCOO All rights reserved. V1.0 Enable Page Priority Page priority determines the phone how to handle the newly received multicast RTP stream when in a multicast session. Enabled page priority, the phone will automatically ignore the low priority multicast RTP stream and receive the high priority multicast RTP stream and hold the current multicast session;... - Page 63 Copyright ©ZYCOO All rights reserved. V1.0 Function Key Item explanation Contrast Set contrast of screen. Enable Backlight Set enable/disable backlight. Line Key Settings Line: select Auto, SIP1, SIP2 or IAX2 in function key type. After you set it, you pick up handset or hands-free, press this function key, and then you can use the corresponding SIP line.
- Page 64 Copyright ©ZYCOO All rights reserved. V1.0 User can press the F1 key to allocate this number by line1 line. Intercom function, you can press this key in standby to automatically answer the call and make each other. User can be configured in accordance with push to talk function the way: 4116 was the other number; Then press the standby button and make it automatically answer the call 4116.
-
Page 65: Maintenance
7.3.7.1 Auto Provision ZYCOO endpoint supports PnP and DHCP and Phone Flash to obtain the parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint will go by the following process to try to obtain the server address and other... - Page 66 Copyright ©ZYCOO All rights reserved. V1.0 DHCP option AUTO PROVISION Item explanation Auto Update Setting Current Config Version Show the current config file’s version. If the version of the configuration downloaded is higher than the version of the running configurations, the auto provision would upgrade, or stop here.
- Page 67 Copyright ©ZYCOO All rights reserved. V1.0 name if config file name keep blank. For example, 000102030405. Protocol Type Specify the Protocol type FTP, TFTP or HTTP. Update Interval Specify update interval time, unit is hour. Different update modes: Update Mode 1.
- Page 68 Copyright ©ZYCOO All rights reserved. V1.0 Syslog Configuration Item explanation Syslog Setting Server Address Set Syslog server IP address. Server Port Set Syslog server port. MGR Log Level Set the level of MGR log. SIP Log Level Set the level of SIP log.
- Page 69 Copyright ©ZYCOO All rights reserved. V1.0 7.3.7.4 UPDATE You can update your configuration with your config file in this web page. Update Field name Explanation Web Update Click the browse button, find out the config file saved before or provided by Web Update manufacturer, download it to the phone directly, press “Update”...
- Page 70 Copyright ©ZYCOO All rights reserved. V1.0 Type Action type that system want to execute: 1. Application update: download system update file. 2. Config file export: Upload the config file to FTP/TFTP server, name and save it. 3. Config fie import: Download the config file to phone from FTP/TFTP server. The configuration will be effective after the phone is reset.
- Page 71 Copyright ©ZYCOO All rights reserved. V1.0 Access Configuration Item explanation Keyboard Password Set the password for entering the setting menu of the phone by the phone‘s key board. The password is digit. This table shows the current user existed. User Set account user name.
-
Page 72: Security
Copyright ©ZYCOO All rights reserved. V1.0 7.3.8 SECURITY 7.3.8.1 WEB FILTER WEB Filter User could make some device own IP, which is pre-specified, access to the MMI of the phone to config and manage the phone. Item explanation Web Filter Table Settings Add or delete the IP address segments that access to the phone. - Page 73 Copyright ©ZYCOO All rights reserved. V1.0 7.3.8.2 FIREWALL Firewall Configuration In this web interface, you can set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices from accessing the Internet (output rule).
- Page 74 Copyright ©ZYCOO All rights reserved. V1.0 Item explanation Enable Input Rules Select it to Enable Input Rules. Enable Output Rules Select it to Enable Output Rules. Input / Output Specify current adding rule by selecting input rule or output rule.
- Page 75 Copyright ©ZYCOO All rights reserved. V1.0 DMZ config: In order to make some intranet equipment support better service for extranet, and make internal network security more effectively, these equipment open to extranet need be separated from the other equipment not open to extranet by the corresponding isolation method according to different demands.
- Page 76 Copyright ©ZYCOO All rights reserved. V1.0 NAT Configuration Item explanation IPSec ALG It is an encryption technology. Select it to enable IPSec ALG, the default is enabled. FTP is a service of connection layer which can transform intranet IP into extranet IP FTP ALG when intranet IP is sending out packet.
- Page 77 Copyright ©ZYCOO All rights reserved. V1.0 VPN Configuration Item explanation VPN IP Shows the current VPN IP address. Select L2TP. You can choose only one for current state. After you select it, you’d better save configuration and reboot your phone.
-
Page 78: Logout
Copyright ©ZYCOO All rights reserved. V1.0 7.3.8.5 SECURITY Security Item explanation Update Security File Select Security File Select the security file you want to update, then click Update button to update. Delete Security File Select Security File Select the security file you want to delete, then click Delete button to update. -
Page 79: Chapter 8 Appendix
Copyright ©ZYCOO All rights reserved. V1.0 Chapter 8 Appendix Digit-character map table Keypad Character Keypad Character 7 P Q R S p q r s 2 A B C a b c 8 T U V t u v 3 D E F d e f...
Need help?
Do you have a question about the CooFone-D30 and is the answer not in the manual?
Questions and answers