Table of Contents 1 Instruction 2 The Appearance of Product 3 Connecting IP Phone 4 IP Phone Setup Menu 4.1 Network mode Settings diagram 4.2 The menu of phone Structure 5 Configuration 5.1 Web Login 5.2 Network-PPPoE Setting 5.3 Network-Static Setting 5.4 Network-DHCP Setting 5.5 SIP Settings 6 Make a Phone Call...
1 Instruction 2 The Appearance of Product Front view and keypad function: This phone can be setted through the LCD or web page. If you own this product to make some VoIP calls,an Ethernet-based Cable or a DSL modem with an active connection to the Internet are necessary. Check Your Package Contents These are the items included with your D30 IP Phone purchase: VoIP Phone D30...
4.2 The menu of phone Structure: 5 Configuration 5.1 Web Login The configuration menu of D30/D30P can be accessed using the convenient and user- friendly interface of a web browser. Open the browser and type into the IP address which can be found in the status of the LCD menu(e.g.http://192.168.1.16)to visit the Web page and make some configuration.
5.2 Network-PPPoE Setting 5.4 Network-DHCP Setting Select DHCP as network connection type if your access network supports DHCP. Select Network from the main menu. Select PPPoE as network connection type if your ISP uses PPPoE.(Most DSL users use PPPoE) 5.5 SIP Settings Select SIP settings from the main menu.The following fields such as Server Address,Server Port,Authentication User,Authentication Password and SIP User are required.Then check 5.3 Network-Static Setting...
6 Make a Phone Call 6.1 IP Address: 1.Lift the handset or press the speaker button or headset button to enter the dialer interface. 2.Dial IP address. For example:Input#192.168.0.1# in the dialer interface,you will call the device whose IP address is 192.168.0.1. 6.2 SIP Number: Note:You have to register with SIP server to use SIP number.
Need help?
Do you have a question about the CooFone-D30 and is the answer not in the manual?
Questions and answers