Zycoo ZP302 User Manual
  1. Manuals
  2. Brands
  3. Zycoo Manuals
  4. IP Phone
  5. ZP302
  6. User manual

Zycoo ZP302 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

®
ZYCOO
ZP302 IP PHONE
User Manual
V1.1
The information contained in this document is subject to change at any time without
prior notification. Specifications of the product are subject to change at any time
without notice. If you want to learn more info about our product, please visit our web
www.zycoo.com.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZP302 and is the answer not in the manual?

Questions and answers

Related Manuals for Zycoo ZP302

Summary of Contents for Zycoo ZP302

  • Page 1 ® ZYCOO ZP302 IP PHONE User Manual V1.1 The information contained in this document is subject to change at any time without prior notification. Specifications of the product are subject to change at any time without notice. If you want to learn more info about our product, please visit our web...

  • Page 2: Safety Notices

    ZP302 User Manual Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device.  Please use the external power supply that is included in the package. Other power supplies may cause damage to the phone, affect the behavior or induce noise.

  • Page 3: Table Of Contents

    ZP302 User Manual Table of Content Introducing ZP302 VoIP Phone ................. 4 1.1. Thank you for your purchasing ZP302 ................4 1.2. Delivery Content ......................... 4 1.3. Keypad ..........................5 1.4. Port for connecting ......................7 2.Initial connecting and Setting ..................8 2.1.
  • Page 4 ZP302 User Manual 4.3.3.1. SIP Config ...................... 30 4.3.3.2. Stun Config ....................33 4.3.3.3. DIAL PEER setting ..................34 4.3.4. Phone ........................37 4.3.4.1. DSP Config ..................... 37 4.3.4.2. Call Service ....................38 4.3.4.3. Digital Map Configuration ................40 4.3.4.4. Phone Book....................41 4.3.5.

  • Page 5: Introducing Zp302 Voip Phone

    1. Introducing ZP302 VoIP Phone 1.1. Thank you for your purchasing ZP302 Thank you for your purchasing ZP302, ZP302 is a full-feature telephone that provides voice communication over the same data network that your computer uses. This phone functions not...

  • Page 6: Keypad

    ZP302 User Manual The handset The handset cable The power supply The Ethernet cable 1.3. Keypad The numeric keypad with the keys 0 to 9, *, and # is used to enter Digits and letters, additionally, the following keys are available:...
  • Page 7 ZP302 User Manual System In idle mode, press the Sysinfo key to check the phone Information setting parameters. Such as local phone number, local IP and local Gateway IP address. Confirm Use the Enter key to enter next menu, or confirm the setting.

  • Page 8: Port For Connecting

    ZP302 User Manual 1.4. Port for connecting POWER Power switch Select ON/OFF Power port Output: 5V/1.0A Network port Connect it to PC Network port Connect it to Network The phone has two Network ports: The WAN port and the LAN port. Before you connect the...

  • Page 9: Initial Connecting And Setting

    ZP302 User Manual 2.Initial connecting and Setting 2.1. connect the phone Step 1: Connect the Phone to the corporate IP telephony network. Before you connect the phone to the network, please check if your network can work normally. You can do this in one of two ways, depending on how your workspace is set up.

  • Page 10: Initial Setting

    ZP302 User Manual Shared network connection—Use this method if you have a single Ethernet port in your workspace with your desktop computer already connected to it. First, disconnect the Ethernet cable from the computer and attach it to the WAN port on the back of your phone. Next, use the Ethernet cable in the package to connect LAN port on the back of your phone to your desktop computer.

  • Page 11: Pppoe Mode

    ZP302 User Manual network-related settings (Netmask, IP gateway, DNS server) from the DHCP server. If your network supports DHCP, you can connect this VoIP Phone directly to the network. If your network doesn’t support DHCP, you need change this VoIP Phone’s network connection setting.

  • Page 12: Static Ip Mode

    ZP302 User Manual still static IP if you press key to display the current IP; if the icon “PPPoE” is showed without blink, it means that the phone has already gotten IP from PPPoE server. 2.2.2. Static IP mode: Press the 1 key for three seconds, then confirm it by the key, your phone network connection mode will switch into Static IP mode.

  • Page 13: Dhcp Mode

    ZP302 User Manual 8. Press the key to return to the previous menu, and then press the key, the LCD screen will display “GATEWAY”. Press the key again and then the key, input your gateway’s IP address and confirm it by pressing the key, the LCD screen will display the inputted gateway address.

  • Page 14: Basic Functions

    ZP302 User Manual 3. Basic Functions 3.1. Basic operation 3.1.1. Accepting a call There are four methods to accept an incoming call: Pick up handset to accept incoming calls. Press the button If you need switch from a hands-free call to handset, please pick up the handset directly.

  • Page 15: Ending A Call

    ZP302 User Manual Press the button then the button you will enter into the phone book. Press the button to select your desired contact person, then press the button to dial the call.  Use Callers Press the key, then select your desired phone number in callers by the key, and next press the button to dial the call.

  • Page 16: Calling Hold And 3 Ways Call

    ZP302 User Manual 2. When A is talking with B, C calls B, B may press the key to hold A, and talk to C. Then B presses the key, A will get through to C. 3. When A talks to B, B presses the key, dial C phone number and # key, then hang up and A will get through to C.

  • Page 17: The High-Level Operation

    ZP302 User Manual Press the key, and then the key, till the LCD screen display “MISSED”. Press the key, the LCD screen will display the missed call number and sequence numbersof the missed call. You can press the key to dial this phone number, you also press UP/DOWN key to...

  • Page 18: Call Pickup

    ZP302 User Manual When you make secondary dial in off-hook/handsfree/standby pre-input mode, press key to postpone input, and screen display will show--. One --stands for 2 seconds. For example, you input 123--45, the phone will send DTMF(45) 2 seconds after the phone call 123. 123------45 will make phone send DTMF(45) at 6 seconds interval.

  • Page 19: Click To Dial

    ZP302 User Manual B’s calling mode at 60 second intervals. once B is available, A will get reminder of rings to hook off, while A hooks off, A will call B automatically. If at this time A is occupied temporarily and unwilling to contact B, A also can cancel the redial function by dialing an appointed prefix plus B’s number before making the redial function.

  • Page 20: Setting

    ZP302 User Manual 4. Setting 4.1. Setting methods VoIP Phone is different from the traditional phone; it need be set to make it active. If your VoIP service provider asks you to set this phone, you can do it easily according to the following methods.

  • Page 21: Configuration Via Web

    ZP302 User Manual Username: admin Password: admin Input username and password, click “logon”, and you will enter setting web interface. There is a selection menu on the left side of the web interface. Click on the desired submenu; the current settings of this submenu will be displayed in the larger field on the right. You can now modify and store the values by using mouse and keyboard of your PC.

  • Page 22: Wizard

    ZP302 User Manual Wizard Field Name Explanation Please select the proper network mode according to the network condition. FV6030 provide three different network settings:  Static: If your ISP server provides you the static IP address, please select this mode, then finish Static Mode setting.

  • Page 23: Call Log

    ZP302 User Manual Display Name If user set the display name, callee will show this display name. Server Address Input your SIP server address. Server Port Set your SIP server port. User Name Input your SIP register account name. Password Input your SIP register password.

  • Page 24: Mmi Set

    ZP302 User Manual Call Log Field name explanation Start Time Display the start time of the outgoing call Last Time Display the conversation time of the outgoing call. Called Number Display the account/protocol/line of the outgoing call. 4.3.1.4. MMI SET 4.3.2.
  • Page 25 ZP302 User Manual Field Name explanation Active IP The current IP address of the phone. Current Netmask The current Netmask address. MAC Address The current MAC address of the phone. Current Gateway The current Gateway IP address. Get MAC Time Shows the time of getting MAC address Please select the proper network mode according to the network condition.

  • Page 26: Qos Config

    ZP302 User Manual Password Input your ADSL password. Notice: 1）Click “Apply” button after finishe your setting, IP Phone will save the setting automatically and new setting will take effect. 2）If you modify IP address, the web will not response by the old IP address. Your need input new IP address in the address column to logon in the phone.

  • Page 27: Qos Configuration

    ZP302 User Manual In chart 1, there is a layer 2 switch without setting VLAN. Any broadcast frame will be transmitted to the other ports except the send port. For example, a broadcast information is sent out from port 1 then transmitted to port 2,3and 4.

  • Page 28: Service Port

    ZP302 User Manual Enable VLAN ID check by selecting it. After enable VLAN ID VLAN ID Check Enable check, if VLAN ID of a data package is not the same with the phone’s or a data package do not have VLAN ID, the data package will be discarded.

  • Page 29: Sntp

    ZP302 User Manual SERVICE PORT Field name explanation set web browse port, the default is 80 port，if you want to enhance HTTP Port system safety，you'd better change it into non-80 standard port； Example: The IP address is 192.168.1.70. and the port value is 8090, the accessing address is http://192.168.1.70:8090...
  • Page 30 ZP302 User Manual SNTP Field name explanation Server Set SNTP Server IP address. Time Zone Select the Time zone according to your location. Time Out Set the time out, the default is 60 seconds. 12 Hours Systems Swich the time mechanism between 12 hours and 24 hours.

  • Page 31: Voip

    ZP302 User Manual 4.3.3. VOIP 4.3.3.1. SIP Config Set your SIP server in the following interface. SIP Config Field name explanation You can switch by 【Load】 Choose line to set info about SIP, there are 2 lines to choose.
  • Page 32 ZP302 User Manual button. Register Status Shows if the phone has been registered the SIP server or not; or so, show Unapplied; Server Name Set the server name. Server Address Input your SIP server address. Server Port Set your SIP server port.
  • Page 33 ZP302 User Manual Enable Via rport Enable/Disable system to support RFC3581. Via rport is special way to realize SIP NAT. Enable PRACK Enable or disable SIP PRACK function, suggest use the default config. Long Contact Set more parameters in contact field; connection with SEM server Enable URI Convert Convert # to %23 when send the URI.

  • Page 34: Stun Config

    ZP302 User Manual transport as message is above 1300 byte Enable Strict Proxy Support the special SIP server-when phone recieves the patckets sent from server， phone will use the source IP address, not the address in via field. Enable GRUU Set to support GRUU 4.3.3.2.

  • Page 35: Dial Peer Setting

    ZP302 User Manual STUN Field name explanation STUN NAT Transverse Shows STUN NAT Transverse estimation, true means STUN can penetrate NAT, while False means not. STUN Server Addr Set your SIP STUN Server IP address STUN Server Port Set your SIP STUN Server Port Set STUN Effective Time.

  • Page 36: Dial Peer

    ZP302 User Manual If user makes the above configuration, after user dials 11 digit numbers started with from 135 to 139, the phone will send out 0 plus the dialed numbers automatically. Use this phone you can realize dialing out via different lines without switch in web interface.
  • Page 37 ZP302 User Manual 3) del: It means that phone will delete the number with length appointed. 4) Rep: It means that phone will replace the number with length and number appointed. You can refer to the following examples of different alias application to know more how to use different aliases and this dial rule.

  • Page 38: Phone

    ZP302 User Manual This setting will realize speed dial When you dial “2”, function, after you dialing the SIP1 server numeric key “2”, the number after will receive all will be sent out. 33334444 The phone will automatically send When...

  • Page 39: Call Service

    ZP302 User Manual DSP Configuration Field name explanation First Codec The fist preferential DSP codec: G.711A/u, G.722, G.723, G.729, G.726 Second Codec The second preferential DSP codec: G.711A/u, G.722, G.723, G.729,G.726 Third Codec The third preferential DSP codec: G.711A/u, G.722, G.723, G.729,G.726...
  • Page 40 ZP302 User Manual In this web page, you can configure Hotline, Call Transfer, Call Waiting, 3 Ways Call, Black List, white list Limit List and so on. Call Service Field name explanation Hotline Specify Hotline number. If you set the number, you can not dial any other numbers.

  • Page 41: Digital Map Configuration

    ZP302 User Manual calls will be rejected. x and . are wildcard. x means matching any single digit. for example, 4xxx expresses any number with prefix 4 which length is 4 will be forbidden to dialed out DOT (.) means matching any arbitrary number digit. for example, 6.

  • Page 42: Phone Book

    ZP302 User Manual Digital Map Configuration Field name explanation End with "#" Set Enable/Disable the phone ended with “#” dial. Fixed Length Specify the Fixed Length of phone ending with. Set the timeout of the last dial digit. The call will be sent after Time out timeout.

  • Page 43: Maintenance

    ZP302 User Manual You can input the name, phone number and select ring type for each name here. Phone Book Field name explanation Shows the detail of current phonebook. Name Shows the name corresponding to the phone number Number Shows the phone number Ring Type Shows the ring type of the incoming call.

  • Page 44: Syslog Config

    ZP302 User Manual Auto Provision Field name explanation Current Config Version Show the current config file’s version. Server Address Set FTP/TFTP/HTTP server IP address for auto update. The address can be IP address or Domain name with subdirectory. Username Set FTP server Username. System will use anonymous if username keep blank.

  • Page 45: Config Setting

    ZP302 User Manual Syslog Configuration Field name explanation Server IP Set Syslog server IP address. Server Port Set Syslog server port. MGR Log Level Set the level of MGR log. SIP Log Level Set the level of SIP log. IAX2 Log Level Set the level of IAX2 log.

  • Page 46: Update

    ZP302 User Manual If you login as Admin, the phone will reset all configurations and Clear Config restore factory default; if you login as Guest, the phone will reset all configurations except for VoIP accounts (SIP1-2 and IAX2) and version number.

  • Page 47: Account Config

    ZP302 User Manual 4.3.5.5. Account Config You can add or delete user account, and change the authority of each user account in this web page Account Configuration Field name explanation Keyboard Password Set the password for entering the setting menu of the phone by the phone ‘s key board.

  • Page 48: Reboot

    ZP302 User Manual Select the account and click the Modify to modify the selected account, and click the Delete to delete the selected account. General user only can add the user whose level is General. 4.3.5.6. Reboot If you modified some configurations which need the phone’s reboot to be effective, you need click the Reboot, then the phone will reboot immediately.

  • Page 49: Firewall

    ZP302 User Manual Add or delete the IP address segments that access to the phone. Set initial IP address in the Start IP column, Set end IP address in the End IP column, and click Add to add this IP segment. You can also click Delete to delete the selected IP segment.
  • Page 50 ZP302 User Manual accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices from accessing the Internet (output rule). Firewall supports two types of rules: input_access rule and output_access rule. Each type supports at most 10 items.

  • Page 51: Logout

    ZP302 User Manual 4.3.7. Logout Click Logout，and you will exit web page. If you want to enter it next time, you need input user name and password again.

  • Page 52: Settings Via Phone's Keyboard

    ZP302 User Manual 4.4. Settings via phone’s keyboard. 4.4.1. How to set via the phone’s keyboard. Press Menu, Up/Down, Enter and exit key to browse, select, and cancel  Use the Up/Down key to browse the menu and submenu ...

  • Page 53: Appendix

    ZP302 User Manual 5. Appendix 5.1. Specification 5.1.1. Device specification Item this VoIP Phone Adapter(Input/Output) Input:100-240VAC 50～60Hz Output:5V/1A 10/100Base- T RJ-45 for LAN, Auto MDIX Port 10/100Base- T RJ-45 for PC, Auto MDIX Power Consumption Idle:1.5W/Active:1.8W LCD size 74 x 28mm Operation Temperature 0～40℃...

  • Page 54: Network Features

    ZP302 User Manual  SIP support SIP domain，SIP authentication（none，basic， MD5），DNS name of server, peer to peer  SIP support 2 servers, user can through each server to calling in and out  DTMF:SIP info，DTMF Relay，RFC2833  SIP application: contain SIP call forward/transfer/holding/waiting/3 way conference/Paging and intercom/ click to dial/pickup/ joincall/redial/unredial.
  • Page 55 ZP302 User Manual Button Character Button Character 7 P Q R S p q r s 2 A B C a b c 8 T U V t u v 3 D E F d e f 9 W X Y Z w x y z...

Table of Contents