Advertisement
INSTALLATION GUIDE
How to assemble the Surround.
Step 1. Removing the gas rails for installations with electric heaters.
For installations with electric heaters lay the surround (A) onto a smooth, flat, clean
surface with the inside facing upward. Unscrew and remove the gas rails as in figure
-
2.
Figure 2. Removing the gas rails
Step 2.
Place wall fixing brackets (B) 100mm from the top outside edge of the legs as
shown in figure 3. Secure in place using four screws (C).
-
Figure 3. Fitting the Wall Brackets to the Surround legs.
©
GDC Group Ltd. 2013
Page 5
Advertisement
