Installing The Elevator Servo - Pheonix Model Extra 330SC Instruction Manual

Instruction Manual
INSTALLING THE WING TO THE FUSELAGE
Attach the wings to the joiner tube and using the
nylon thumbscrews to secure the wing panels to
the fuselage.
Plastic screw

INSTALLING THE ELEVATOR SERVO

1. Remove the covering from over the precut servo
box on the elevator.
2. Install two servo to the elevator as shown.
Remove the covering
14
3. Remove the covering from the elevator to install
the control horn.
15
4. Install and secure the control horn using the
C.A glue.
16
5
EXTRA 330SC
17
18
Remove the covering
19
20