Installing The Aileron Servos - Pheonix Model Tiger Moth 40 Instruction Manual

Instruction Manual
1

Installing the aileron servos.

Installing the aileron servos.
1
Remove the covering.
4
Remove the covering.
7
Tape the servo lead into the end of the
thread.
10
Secure the servo.
13
Install the control horn.
2
Remove the covering from the aileron
servo box
(at the bottom of the wing)
5
Glue the two servo box by C.A glue.
8
Pull the servo lead out.
11
The control horn and the pushrod of
the aileron.
14
Attach the clevis to the control horn.
TIGER MOTH 40
3
Two servo box.
.
6
Insert the thread into the wing.
9
Using the masking tape, tape the servo
lead onto the top of the wing.
12
Install the clevis to the aileron pushrod.
15
Cut away the aileron pushrod.
Nut
2