11.6 Remote control instructions
Instruction:
H4D
11.7 Printer mode
The following conditions must be met to provide successful communication between
the weighing balance and the printer.
Use a suitable cable to connect the weighing balance to the interface of the
printer. Faultless operation requires an adequate KERN interface cable.
The Baud rates of balance and printer must agree, see chap. 9.3.
Printout examples:
Weighing mode/peak value function
Density determination
d= 2.80066 g/cm3d
d
Parts counting
Pcs
Weight:
PMU:
PCS
Number of pieces
Weight
Weight of placed pieces
PMU
Average parts weight
74
Function
Taring
Adjustment
Enter
Menu
ON/OFF
100
300.000 g
3.000 g
ALJ/ALS/PLJ/PLS-BA-e-1338