Auto Zero - KERN ALJ Operating Manual

9.4 Auto Zero

Under this menu item the automatic zero point correction can be switched on or off.
In switched-on-state the zero point is automatically corrected at drift or when dirty.
Information:
In the event that small quantities are removed or added to the material to be
the balance, evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off this
function.
In weighing mode press the MENU button and keep it pressed until the acoustic
signal gets mute.
Press MENU button repeatedly
Acknowledge using PRINT button, the current setting is displayed.
46 ALJ/ALS/PLJ/PLS-BA-e-1338
ced on