Checkweighing - KERN ALJ Operating Manual

10.4 Checkweighing

An upper and a lower limit value can be established to ensure that the weighed
goods are exactly within the established tolerance limits.
The display [L], [ok] or [H] shows whether the goods to be weighed are within the
two tolerance limits.
The indetermination if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal.
In weighing mode press MENU
Press MENU button repeatedly
Confirm using the PRINT button, the display to enter the lower tolerance limit
appears.
Enter the lower limit value using the arrow buttons
Confirm using the PRINT button, the display to enter the upper tolerance limit
appears.
Enter the upper limit value using the arrow buttons
Confirm using the PRINT button, the display to adjust the signal tone appears.
Select the desired settings by pressing the MENU button
64
Goods to be weighed below tolerance limit
Goods to be weighed within tolerance range
Goods to be weighed above tolerance limit
ALJ/ALS/PLJ/PLS-BA-e-1338