BMW K 1200 R Rider's Manual page 116

topple in the course of the
7
operations described below.
Make sure that the motorcy-
114
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Removing seat (
Switch off ignition.
z
Remove screw 1.
51)
Pull lamp housing toward
rear out of brackets 2.
Turn bulb holder 3 counter-
clockwise to remove it from
bulb housing.
Press bulb into its socket
and turn it counterclockwise
to remove.
Install brake and tail light in
reverse order.
Use a clean, dry cloth to
hold new bulb.
Replacing front/rear turn
indicator bulbs
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Switch off ignition.