Starting Off With Bmw Integral Abs Oe; Integral Abs Oe; Running In - BMW K 1200 R Rider's Manual

Starting off with BMW
OE
Integral ABS
Starting on grades:
Engage gear.
Release clutch lever and
brake lever.
Switch on ignition.
Wait for ABS self-diagnosis
to complete.
Operate brake and clutch.
Starting engine.
ABS warning lights
The ABS warning light
is shown in two versions
depending on country:
Country version 1.
Country version 2.
The following description is
made based on country ver-
sion 1.
ABS pull-away test
After starting off, the BMW
Integral ABS checks the ABS
sensors.
ABS warning light flash-
es once per second.
The ABS warning light goes
out after completion of the
starting-off test.
If an error message is shown
after the starting-off test is
completed:
Read the meaning of this
display in the chapter "Dis-
plays".

Running in

The first 600 miles
(1,000 km)
While running in motorcy-
cle, vary throttle opening
and engine-speed range
frequently.
Try to do most of your rid-
ing during this initial period
on twisting, fairly hilly roads,
avoiding high-speed main
roads and highways if pos-
sible.
Exceeding the specified
engine speeds while run-
ning in will lead to increased
engine wear.
Adhere to the specified en-
gine run-in speeds.
Do not exceed engine run-
in speeds.
Engine run-in speeds
-1
7000 min
5
65
z