Hazard Warning Flash- Ers; Flashers - BMW K 1200 R Rider's Manual

A spare key attached
4
to the same ring as the
ignition key used to start the
40
engine could "irritate" the
electronics, in which case the
enabling signal for starting is
not issued. The warning
is shown in the multifunction
display.
Always store the spare key
separately from the ignition
key.
z
Replacement and extra
keys
You can obtain replacement
keys only through an autho-
rized BMW motorcycle retail-
er. The keys are part of an
integrated security system, so
the retailer is under an obli-
gation to check the legitimacy
of all applications for replace-
ment/extra keys. If you want
to have a lost key barred, you
must bring along all other
keys that belong to the mo-
torcycle. A key that has been
barred can subsequently be
cleared and reactivated for
use.
Hazard warning flash-
EWS
ers
Switching on hazard
warning flashers
Switch on ignition.
Press button for left turn in-
dicator 1 and right turn indi-
cator 2 simultaneously.
The hazard warning
flashers place a strain
on the battery. Do not use
the hazard warning flashers
for longer than absolutely
necessary.
If a turn indicator button
is pressed with the igni-
tion switched on, the flashing
function replaces the emer-
gency flashing function as
long as the button is pressed.
If the turn indicator button
is released, the emergency
flasher function becomes ac-
tive again.
Hazard warning flashers in
operation.
Left/right turn indicator
lights flash.
Switch off ignition.
Hazard warning flashers
continue to operate.
Left/right turn indicator
lights off.