BMW K 1200 R Rider's Manual page 114

7
112
Disconnect plug 4.
z
Remove spring wire brack-
ets 5 from their detents on
left and right and fold them
up.
Remove bulb 6.
Install bulb in reverse order.
Use a clean, dry cloth to
hold new bulb.
On assembly, make sure
that lug 7 points upwards.
Replacing side-light bulb
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Switch off ignition.
Remove mounting screws 1
on both sides of lamp hous-
ing.