Lamps - BMW K 1200 R Rider's Manual

7
110
Push the rear wheel stand
from the left into the rear
axle.
Apply the retaining disk
from the right; to do so,
z
press the unlock button.
Place your left hand on the
left grab handle of the mo-
torcycle 4 and your right
hand on the lever of the rear
wheel stand 5.
Raise the motorcycle, simul-
taneously pressing the lever
downwards until the motor-
cycle stands vertically.
Press the lever onto the
ground.

Lamps

General instructions
The failure of a bulb is sig-
naled in the display by the
lamp defect symbol. If the
brake or rear light fails, the
general warning light also
lights up in yellow. If the rear
light fails, the brake light is
used as a substitute in that
the luminosity of the second
glow filament is reduced to
rear light level. Failure of the
rear light is nevertheless indi-
cated in the display.
A defective bulb places
your safety at risk be-
cause it is easier for other
users to oversee you and
your motorcycle.
Replace defective bulbs as
soon as possible; always car-
ry a complete set of spare
bulbs if possible.