BMW K 1200 R Rider's Manual page 103

sensor cable is not dam-
aged.
Raise front of motorcycle
until front wheel can rotate
freely. To raise motorcycle,
it is advisable to use BMW
Motorrad front wheel stand.
Mounting front wheel stand
( 108)
Remove right-hand axle
clamping screw 6.
Remove quick-release
axle 7, holding wheel as you
do so.
BMW Motorrad offers
an adapter for removing
the quick-release axle. This
adapter can be combined
with a commercially available
22 mm open-end or ring
wrench. The adapter with
BMW special tool number
36 3 691 can be obtained
from your authorized
BMW motorcycle retailer.
with OE BMW Motorrad Inte-
gral ABS:
The left axle clamping
screw fixes the thread-
ed bush in place in the front
suspension. A poorly aligned
threaded bush results in in-
correct spacing between the
ABS sensor ring and the ABS
sensor, and therefor to ABS
malfunctions or destruction of
the ABS sensor.
To ensure the proper align-
ment of the threaded bush,
do not loosen or remove the
left axle clamping screw.
7
101
z