Britax MAXI GUARDSICT8300 A 2013 series Instructions For Installation & Use page 17

CARE & MAINTENANCE
E. Unhook the elastic loops at the bottom of the
restraint located under the front of the restraint,
and at the back of the restraint at the top.
Unclip the press studs on the cover in the middle
panel.
F. Remove the cover while feeding through the
crotch buckle, harness straps and armrests
through the slots in the cover. If fitted with a
harness adjuster button, peel the cover from the
button housing starting at one corner.
IMPORTANT:
There is no need to remove the straps from the strap connector at the rear.
32
Instructions for Installation & Use - Series No. 8300/A/2013
Unhook the elastic loops at the
back of the restraint
Press studs
E
Unhook the elastic loops at the
bottom of the restraint
TO REPLACE COVER:
A. Stretch the cover over the top of the restraint
first, then the sides, then stretch the cover
around the rim of the restraint. Attach the elastic
loops to the hooks on the restraint at the bottom
of the restraint and up the top. Reattach the
press studs in the middle panel, feed the crotch
buckle through slots in cover.
B. Feed the crotch buckle, harness straps and
armrests through the slots in the cover. If fitted
with a harness adjuster button, feed the cover
over the button housing starting at one corner.
Pull the adjuster strap through the cover. Ensure
the harness straps are not twisted.
Instructions for Installation & Use - Series No. 8300/A/2013
CARE & MAINTENANCE
Attach the elastic loops at the
back of the restraint
Press studs
Feed the
crotch buckle
through slots
in cover
Attach the elastic loops at the
bottom of the restraint
Stretch cover over push button
housing and pull through
adjuster strap
33