Britax MAXI GUARDSICT8300 A 2013 series Instructions For Installation & Use page 16

CARE & MAINTENANCE
TO CLEAN THE COVER
The restraint has a flame retardant cover which is removable for
cleaning. Cleaning instructions are on the care label attached to the
cover. When washing cover engage hook & loop strips together to
eliminate other garments being caught. Ensure to keep strips free of
lint to work effectively.
The cover has been designed to protect your child when seated in the
restraint. Care should be taken if children either eat or drink while in
the restraint as some food or drink products may cause damage or
marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be damaged -
soak in water and gently remove.
IMPORTANT:
Do not pull sticky items from covers as the cover may be damaged - soak in
water and gently remove.
VERY IMPORTANT :
Only replace the cover with BRITAX Safe-n-Sound
supplied replacement cover with identical shoulder
height markers or a replacement cover meeting
AS/NZS 8005.
30
Instructions for Installation & Use - Series No. 8300/A/2013
TO REMOVE COVER:
A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness buckle.
C. Remove any accessories, insert pad, shoulder pads (if fitted) and
Ez buckle (if fitted).
See pages 35 to 37 to remove or replace any Accessories.
D. Remove headrest cover by unclipping the press studs on the on the cover underneath the headrest
wings. Lift elastic over headrest wings while peeling away headrest cover.
D
Pull to unclip press stud
Instructions for Installation & Use - Series No. 8300/A/2013
CARE & MAINTENANCE
Peel headrest
cover over
headrest wings
D
31