Victory Motorcycles Kingpin 2004 Manual page 127

Fuses
Caution
Use only recommended amperage fuses to avoid damage to the electrical system.
1. Remove the right side cover and release the fuse box from the bracket.
2. Release the tabs on each side of the fuse box cover, and remove the cover.
3. Remove the damaged fuse from the fuse box and seat the new fuse firmly in its
place. A spare 15 amp fuse is located in the fuse box.
4. Reinstall the fuse box cover with the double cutout toward the front of the
motorcycle. The fuse box decal should be readable from the right side of the
motorcycle.
5. Reinstall the fuse box to the bracket.
NOTE: The fuse box assembly can be removed by lifting the lever tab at the front
of the fuse box and sliding the box forward to release from bracket. (See page 27).
6. Reinstall the side cover and the operator's seat.
Fuse Application
Engine / ECM
Fuel Pump
Headlamp / Brake Lamp
Tail Lamp, Flashers, Indicator Lamp, Horn
Ignition / Gauges
Spare Fuse
Fuse Size
15 amp
10 amp
15 amp
15 amp
15 amp
15 amp
MAINTENANCE
1
125