Battery Removal - Victory Motorcycles Kingpin 2004 Manual

MAINTENANCE
Battery

Battery Removal

1. Remove the left side cover and battery cover.
2. Disconnect the negative ( - ) battery cables (cable ends are exposed).
3. Disconnect the positive ( + ) cables (cable ends are covered with a
red boot).
Caution
Disconnecting the positive cable first can produce an electric shock
that could result in damage or injury.
4. Slide the battery out.
Universal Tool (A)
The universal tool is located in a holder under the left side cover. The universal tool can be used to service the
following items:
Oil Drain Plug
Turn Signal Bulb
Indicator Bulbs
Air Filter
122
Handlebar Adjustment
Accessory Windshield Fasteners Accessory Driver's Backrest Fasteners
Headlight Bulb
Passenger Seat (Unless the motorcycle is equipped with a touring package)
Belt Tension Adjusters (After loosening axle nut)
Accessory Saddlebag Fasteners
A