Yamaha TF5 User Manual page 17

SENDS ON FADER screen
Allows you to use the faders to adjust the send level for each channel.
In SENDS ON FADER mode, the details area changes to display SENDS ON FADER information.
Note, however, that the display does not change for channels that have no send destination.
1
Send pan slider
Displayed for stereo AUX buses. Allows you to adjust the pan of the signal sent to the AUX bus.
2
Send ON button
Determines whether a signal is sent (on) or not sent (off) to the corresponding AUX bus. This button lights when the send is turned on.
3
Send level fader
Allows you to adjust the send level of the corresponding channel. You can tap the value and then increase and decrease it by
tapping the up and down arrows.
4
Fader
Determines the amount of signal sent to the corresponding AUX bus.
5
PRE button
Allows you to select whether the pre-fader or post-fader signal is sent to the corresponding AUX bus. This button lights when
it is turned on.
On: Before the fader
Off: After the fader
6
CH NAME display
Displays the channel's number, name, icon, and color.
- 17 -
Screen areas
TF StageMix
User's Guide