Screen Areas; Home Screen - Yamaha TF5 User Manual

Screen areas

HOME screen

The HOME screen is the main screen of StageMix. It is displayed each time you start StageMix.
You can return to this screen by tapping [HOME] in the TOOLBAR area.
METER area
Displays input level, output level, and fader levels. In SENDS ON FADER mode, it displays send levels.
1
ONLINE button
Displays the SELECT MIXER screen
When StageMix is connected to a console, the name of the console is displayed here.
When no console is connected (i.e., offline demo mode), "OFFLINE" is displayed.
2
SETUP button
Displays the SETUP screen
3
Meter display
Displays all input and output meters.
Meters are displayed in green for up to -20dB, yellow for up to -3dB, and in red for levels higher than -3dB.
You can change the meter point in the SETUP screen
Note that the meter point for the MONITOR channel is always pre-fader.
The fader level for each channel is indicated by a white line. A thick white line is displayed when the fader is at the nominal
(0dB) level.
If a channel is turned off, the background of the meter is displayed in black and the meter itself is displayed in gray.
The area displayed in the details area is indicated in the METER area by a white box. You can drag this box left and right to
display other channels in the details area.
In SENDS ON FADER mode, each channel's send level is displayed here. In this case the fader level bar is displayed in the color
assigned to the destination channel.
(page 11).
(page 12).
(page
- 10 -
METER area
Details area
Overview strip area
TOOLBAR ares
12).
Screen areas
TF StageMix
User's Guide