Lp Conversion Instructions - Travis Industries 564 Cleanface Installation Manual

Finalizing the Installation

LP Conversion Instructions

Install the conversion kit prior to installing the gas line to ensure proper gas use.
The GSR Stepper Motor Kit (SKU 94400999) is required for converting this appliance to LP. The
kit contains the stepper motor (regulator) and torx wrench. The burner orifices and burner
gaskets are shipped with the appliance.
1 Remove the glass (see page 43). Remove the logs and embers (if installed - page 44)
2 Remove the burner (see illustration below)
1/4" Nutdriver
Remove the grate.
1/4" Nutdriver
Remove the front burner.
Remove the rear burner.
Travis Industries
(for qualified installers only)
4141209
1/4" Nutdriver
51
100-01378