Webb WER21HW Operator's Manual page 5

m) Disengage all blade and drive clutches before starting the engine.
n) Start the engine or switch on the motor carefully according to instructions and with feet well
away from the blade(s).
o) Do not tilt the lawnmower when starting the engine or switching on the motor.
p) Do not start the engine when standing in front of the discharge chute.
q) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all
times.
r) Never pick up or carry a lawnmower while the engine is running.
s) Stop the engine and disconnect the spark plug wire:
- before clearing blockages or unclogging the chute;
- before checking, cleaning or working on the lawnmower;
- after striking a foreign object, then inspect the lawnmower for damage and make repairs
before restarting and operating the lawnmower;
- if the lawnmower starts to vibrate abnormally (check immediately).
t) Stop the engine:
- Whenever you leave the lawnmower;
- Before refuelling.
u) Reduce the throttle setting during engine shutdown and, if the engine is provided with a shutoff
valve, turn the fuel off when you have finished mowing.
v) Shut the engine off and wait until and the blade comes to complete stop before removing the
grass catcher.
w) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other
people or their property.
x) Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.
y) Never attempt to make wheel height adjustments while the engine is running.
Maintenance and Storage
a) Keep all nuts, bolts and screws tight to ensure the equipment is in safe working condition.
b) Never store the equipment with petrol in the tank, especially inside a building where fumes can
reach an open flame or spark.
c) Allow the engine to cool before storing in any enclosure.
d) To reduce the risk of fire, keep the engine, silencer, battery compartment and petrol storage area
free of grass, leaves, or excessive grease.
e) Replace worn or damaged parts to ensure your machine runs safely and efficiently.
f) If the fuel tank has to be drained, this should be done outdoors.
g) Only use accessories approved by the manufacturer.
h) Keep the machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillages. Allow
the machine to cool before storing.
i) Grass catcher components are subject to wear, damage, and deterioration, which could expose
moving parts or allow objects to be thrown. Frequently check components and replace with
manufacturer's recommended parts, when necessary.
j) Mower blades are extremely sharp. Wrap the blade(s) or wear gloves, and use extra caution when
servicing them.
4