Kunzle & Tasin VEGA User & Maintenance Manual page 12

VEGA User Manual_
Starting the machine
5. Locate the power supply. The socket must be compatible with the plug. To avoid electrical hazards the socket
must be earth protected with a 20 A fuse. Connect the plug to the socket.
6. Raise the disc so that the
machine is only resting on the
floor with its wheels and press
the green ON button.
7. Keep the machine moving when
the abrasive disc is lowered and
in contact with the work surface.
8. To stop the machine raise the
disc so that the machine is only
resting on the floor with its
wheels and press the red OFF
button.
WARNING
A safety contactor is fitted to the machine. If the power fails when sanding the contactor is activated
automatically, stopping the machine from accidentally starting up when the power is restored. To
recommence sanding repeat the start-up operations described above.
March 2013 Edition
12