Simrad E5024 ECDIS Installation Instructions Manual page 30

28 |
Units, date, and time
Set preferred units, and time and date settings.
Localization
Used for selecting the language available.
Users
The master user is the only preconfigured user, and has full access to all settings. If other users
are to be added, the first step is to assign a password for the master user. Ensure this password
is recorded and securely stored by the vessel's master user.
Additional users can be added, and are automatically given restricted access. Restrictions
include inability to edit settings under Performance characteristics, Parameters, and
Sensors, which do not require changes in day to day operation.
SA certificates
The S-63 data protection scheme requires a Scheme Administrator certificate, or public key,
to be installed on the system. Usually it is pre-installed, but in case the System Administrator
issues a new certificate you must be able to install it on the system.
Installing SA certificates
To install an SA certificate:
1. Go to Settings, System, and then select SA certificates. A list of the currently installed SA
certificates found in the E5024 ECDIS system will open
¼ Note:
When you open the SA certificates panel for the first time after the E5000 ECDIS system
launch, the SA certificates launch will start automatically. You can refresh the list using the
Refresh button found in the top left corner of the screen.
2. Install an SA certificate by selecting the Install button
will open
3.
Compare the data displayed with the SA certificate published on the web-site of the Scheme
Administrator and select OK if the data are identical or Cancel if you find any discrepancies
4. After selecting OK, the certificate is installed in the system and a message notifying you about
this appears
¼ Note:
If you install a newly issued SA certificate, it overwrites the old certificate. If you install
an SA certificate from a different Scheme Administrator, it is installed alongside the previously
installed certificates.
ECDIS Software setup | E5024 ECDIS Installation Manual
. A window with certificate data