Onvif Compatibility And Included Software Overview; Nvms; Cd Contents; Connection - eLine ELI-SIP-B21-312R Instruction Manual

1.3 ONVIF Compatibility and Included Software Overview

This camera is ONVIF v2.1 compliant. It is designed for interoperability with
popular VMS's and NVR's*, with backwards compatibility to ONVIF v.1.02. For
more information on ONVIF, visit www.onvif.org
NOTE: Provided software is PC compatible only; Mac OS® access to the
cameras is available via Safari® browser only.

1.3.1 NVMS

• NVMS is a client-only solution that supports up to 36 IP
cameras. NVMS is a free software provided on the CD.
• NVMS supports all the features of the camera. It can access micro SD/
SD card recordings and camera setup over a local network.
• NVMS manual is provided on the CD.
1.3.2 CD Tools
• CD contents Folders
IP Search ; Search find IP Cameras and set IP address and gateway
NTP Service Tool ; Time Sync Application: IP devices match one PC system time.
FTPUpdater ; Firmware Update tool
IP Support Help Files ; Website support help documents for common problems.
RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use
SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC
Onvif_Help ; documents on Onvif specifications
Open the NTP service ; Windows XP only enables NTP time to be enabled.
Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS
Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10
Files:
IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices
NVMS_Install.exe ; NVR Software installation for PC
NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software
SNMedia_Player.exe ; File Player for recorded files / backup files from devices /
NVMS.
eLine Technology
3
Getting Started Camera Installation

2. CONNECTION

The camera has the following termination cables:
1. RJ45 Network Interface: Connect to a router or switch on your network
using RJ45 Ethernet cable (Cat5e or better). 100Mhz connection. PoE
supported (class 3 PoE switch required).
NOTE: Use the included RJ45 coupler to connect to male end of RJ45
Ethernet cable.
RJ45 Coupler
2. Audio Input (RCA): Connect to a self-powered microphone for listen-in
audio.
3. Audio Output (RCA): Connect to an amplifier or self-powered speaker for
intercom/2-way audio.
4. DC12V (1A): 12V DC power input terminal. Make sure to follow correct
polarity (+/-) marked on the power connector when connecting to power.
• Minimum Power Requirement: 450mA / 5.4W.
Make sure to follow the correct polarity if connecting
the camera to DC power. Polarity is marked on the
power connector.
eLineTechnology.com
4