Mirror; Noise Filter; Resetting To Factory Defaults - eLine ELI-SIP-B21-312R Instruction Manual

6.17.10 Mirror

Enable/disable image mirroring.
• Mirror: Select Horizontal to mirror the image horizontally, Vertical to
mirror vertically, or Picture Flip to mirror both horizontally and vertically.
Select Close to disable image mirroring.
6.17.11 Noise Filter (solution may not feature this setting)
Configure noise filter settings.
• Noise Filter: Select Auto for automatic noise filtering or Manual.
• Max Level: Select the maximum level for automatic noise filtering.
• Level: Select the level for manual noise filtering.
eLine Technology
57
Web Configuration

Resetting to Factory Defaults

7. RESETTING TO FACTORY DEFAULTS
Follow the steps below to revert all settings to factory defaults. The camera
must be connected to power to perform a factory reset.
1. Remove the camera underside
1.
screws (2x)
Reset Button
2. Press and hold the white
2.
reset button for 5 seconds
then release the button to
reset the camera to factory
defaults.
3. Re-attach the panel cover
and replace the camera
cover screws (2x).
NOTE: Make sure rubber seal is firmly in place when replacing the panel
cover.
eLineTechnology.com
58