Connecting To A Ddns Address Using Nvms - eLine ELI-SIP-B21-312R Instruction Manual

5.1 Connecting to a DDNS address using NVMS

NOTE: Complete all the steps above before performing the following
method.
1. Open NVMS and click Device Manager>Video Device Manager.
2. Click Manager. The Device Maintenance window opens.
Enter the
camera's
DDNS address
Click Add
3. Under Device IP, enter the Domain Name from the confirmation email.
For example, enter mycamera.dyndns,org.
4. Under Control Port, enter the camera's control port (default: 30001).
5. (Optional) Under Device Name, enter a name for the camera.
6. Click Add to add the camera to the Device List.
7. Click Save to save changes. Click OK.
eLine Technology
15
Configuring Remote Connection
Control
Port
Click Save
Configuring Remote Connection
8. Close Device Maintenance and Device Manager, and return to the Live
Video screen. The newly added camera will appear in Device List.
Found camera
NOTE: A icon is shown for all cameras outside of the LAN. This does
not affect your ability to connect to the camera remotely.
9. Click on the camera in Device List to login. Enter the User Name (default:
admin) and Password (default: admin) and then click Continue.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Continue
10.Click and drag the camera to a display grid screen to open it.
Click and drag the
camera to the display
grid to open it
NOTE: For detailed instructions on using NVMS, see the NVMS
manual on the CD.
eLineTechnology.com
16