Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for eLine ELI-SIP-B21-312R
Summary of Contents for eLine ELI-SIP-B21-312R
- Page 1 NETWORK CAMERA GUIDE Install Browse Network Camera setup and installation guide. Browser setup with settings explained. Product Made in China under ISO9001 & ISO1400 standards 01.BSM.16.1000002 Manual Printed in China v1.0 eLine Technology eLineTechnology.com...
-
Page 2: Instruction Manual
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT. Instruction Manual English Version 1.0 eLine Technology eLineTechnology.com... -
Page 3: Important Safeguards
General Precautions exit from the video product. accessory recommended by the manufacturer. eLine Technology eLineTechnology.com... - Page 4 In order to improve the feature functions and quality of this product, the specifications are subject to change without notice from time to time. • IP66 Weatherproof and IK7 Vandal Resistant • Multi-browser support: IE, Firefox, Safari, Chrome • 3-axis gimbal for versatile mounting * Check Onvif compliance on for your software. eLine Technology eLineTechnology.com...
-
Page 5: Table Of Contents
6.7.6 Microphone ............31 eLine Technology... -
Page 6: Getting Started
NOTE: Once you have completed the basic setup of the camera, it is recommended to configure a static IP address. This will prevent the camera IP address changing in the event of a power failure. For details, see “6.7.1 Local Network” on page 26. eLine Technology eLineTechnology.com... -
Page 7: Onvif Compatibility And Included Software Overview
(+/-) marked on the power connector when connecting to power. • Minimum Power Requirement: 450mA / 5.4W. Make sure to follow the correct polarity if connecting the camera to DC power. Polarity is marked on the power connector. eLine Technology eLineTechnology.com... -
Page 8: Camera Installation
Make sure to follow the correct polarity if connecting the camera to DC power. Polarity is marked on the power connector. 1. Use the included drill template to drill holes for mounting Use Supplied wall plugs. Wall eLine Technology eLineTechnology.com... -
Page 9: Finding The Camera's Ip Address
3. NVMS opens and scans the local network for connected cameras. Tighten Loosen Detected camera IP addresses on the LAN appear in the Device List on the left side of the screen with a icon. Found camera IP address eLine Technology eLineTechnology.com... -
Page 10: Finding The Camera's Ip Address Using Bonjour® In Mac Os
UPnP is enabled in the camera by default, and can be enabled/disabled using NVMS (check the NVMS manual for details). 1. Open Safari® browser and click the Bookmarks button ( eLine Technology eLineTechnology.com... -
Page 11: Finding The Camera's Ip Using The Bnc Test Cable
The camera must be connected to power to use the BNC test cable. HTTP NOTE: The default IP address of 192.168.0.120 is shown if the camera cannot obtain an IP address from the router. Check the Ethernet/power 30001 Control 30001 connections and router configuration. eLine Technology eLineTechnology.com... - Page 12 The following outlines how to set up your free DDNS account. NOTE: Your router must support UPnP to enable DDNS. NOTE: You may use the same DDNS account for multiple IP cameras on the same LAN. eLine Technology eLineTechnology.com...
-
Page 13: Connecting To A Ddns Address Using Nvms
6. Click Add to add the camera to the Device List. 7. Click Save to save changes. Click OK. Click and drag the camera to the display grid to open it NOTE: For detailed instructions on using NVMS, see the NVMS manual on the CD. eLine Technology eLineTechnology.com... -
Page 14: Web Configuration
Connection” on page 12 for details). 3. Under User Name and Password, enter the camera’s User Name (default: admin) and Password (default: admin) and click Login. Enter Camera User Name (default: admin) Enter Camera Password (default: admin) Click Login eLine Technology eLineTechnology.com... - Page 15 (default: admin) and Password (default: admin) and click Login. completing the installation, restart your browser and reconnect to the camera. Enter Camera User Name (default: admin) Enter Camera Password (default: admin) Click Login Select ActiveX or Flash Player eLine Technology eLineTechnology.com...
-
Page 16: Web Interface/Live Video Overview
ActiveX® plug-in or Adobe Flash Player. 6.4.1 Live Video Menu You can right-click on the live video area to bring up the Live Video Menu. Right-click on the video area to open the Live Video Menu eLine Technology eLineTechnology.com... -
Page 17: Device Info
• Audio Encode Type: Select the Audio Encoding type for the stream: G711_ALAW, G711_ULAW, or RAW_PCM. • Resolution: Select the resolution for the stream. Stream1 and stream3 can be set to 1920x1080 or 640x360. Stream2 can only be set to 640x360. Stream3 can only be set to 1920x1080. eLine Technology eLineTechnology.com... -
Page 18: Device Configuration
• IP Address: Enter the IP address you would like to assign to the camera. • Dome PTZ (Not supported) Make sure the IP address is available on your network. • Subnet Mask: Enter the subnet mask. • Preferred DNS Server/Alternate DNS Server: Enter desired DNS servers. eLine Technology eLineTechnology.com... -
Page 19: Camera
Two cameras cannot use the same port number. To change camera ports: 1. Configure the camera ports as required and then click OK. 2. Click Device Configuration>Device Port. The Date & Time page allows you to configure the camera’s date and time. eLine Technology eLineTechnology.com... -
Page 20: Osd
To set the camera’s date and time manually: • Time: Show the date and time on the OSD. Select the desired date and 1. Click Device Configuration>Date & Time. time format under Time Format. 2. Under Time Zone, select your time zone. eLine Technology eLineTechnology.com... -
Page 21: Microphone
Off to disable and click OK. 6.7.8 Language 4. Click OK to update the camera OSD. 6.7.6 Microphone Change the language for the camera OSD display (e.g. time and date display) and email alarms. Supported languages are English, Polish, Russian, and Chinese. eLine Technology eLineTechnology.com... -
Page 22: Alarm Configuration
Alarms can be viewed using the Alarm Manager in NVMS (see the NVMS manual on the CD for details). To configure Disk Alarms: 1. Click Alarm Configuration>Disk Alarm. 2. Check Disk Full Alarm to enable Disk Full Alarms. eLine Technology eLineTechnology.com... -
Page 23: Local Record
1. Click Local Record>Record Directory. 2. Make sure to disable all recording types in Record Policy before formatting the microSD/SD card. See “6.9.2 Record Policy” on page 41. 3. Under Disk Name, select SD1. 7. Click OK to save your settings. eLine Technology eLineTechnology.com... - Page 24 • Accounts: Enter the FTP account user name. • Password/Confirm Password: Enter the FTP password. • Free Space: Enter the amount of space (in MB) you would like to make available on the FTP server for recording. eLine Technology eLineTechnology.com...
- Page 25 Uncheck to limit the amount of space the camera can record on and enter the amount of space (in MB) available to the camera under Free Space. 5. Click OK. Click Modify 3. Click Modify. The Record Disk Path menu opens. eLine Technology eLineTechnology.com...
-
Page 26: Record Policy
7. Under Storage Rule, select Cycle Write to enable the camera to overwrite the oldest recorded data once the available space in the storage location is filled. Or, select Save Days to save video for a set eLine Technology eLineTechnology.com... -
Page 27: Privacy Masking
3. Click and drag inside the video area to configure privacy areas. Privacy Domain Name is mycamera.dyndns.org, use the address http://mycamera.dyndns.org:80. areas will be shown as green rectangles. Right-click to delete the last created area. • User Name: Enter your User Name you registered as. eLine Technology eLineTechnology.com... -
Page 28: Service Center
• Motion alarms must be enabled before the camera will send email alerts. See “6.8.2 Motion Alarm” on page 34. • A static IP address must be configured for the camera and DNS servers must be entered. See “6.7.1 Local Network” on page 26. eLine Technology eLineTechnology.com... -
Page 29: Group
4. Check the permissions you would like to apply to this user group. You can check or un-check Select All to select all or no permissions. 5. Click OK to save your new user group. To modify a user group: eLine Technology eLineTechnology.com... -
Page 30: Unlocking User Accounts
User accounts are locked out if the wrong password is entered 3 or more times. To unlock a user account: 1. Login to the camera as admin. Click Device Restart. Click Restart then click OK to restart the camera. eLine Technology eLineTechnology.com... -
Page 31: Default Settings
Sensor Config. Right-click in the video area Adjust the Brightness, Saturation, and Contrast settings for the image. and select Sensor Config 6.17.2 Shutter Control Adjust the camera shutter settings. • ShutterMode: Select AutoShutter or FixedShutter. eLine Technology eLineTechnology.com... -
Page 32: Gain Mode
• Iris Speed: If Auto Iris is set to ON, select Auto Iris speed. • FixedGain (dB): Select the gain value when FixedGain is selected. 6.17.6 Gamma 6.17.4 Day/Night Mode Adjust Gamma. Configure color settings for night mode. • Gamma: Select gamma setting: Standard, High, Middle, Low, or Dynamic. eLine Technology eLineTechnology.com... -
Page 33: Ae Meter Mode
If you notice color distortion, it is recommended to turn Control Mode to OFF. 6.17.8 WB Setting • Working Mode: Select DLO (Digital Side Overflow) for environments with few moving objects. Select MC (Motion Compensation) for environments with multiple moving objects. Adjust White Balance. eLine Technology eLineTechnology.com... -
Page 34: Mirror
• Max Level: Select the maximum level for automatic noise filtering. defaults. • Level: Select the level for manual noise filtering. 3. Re-attach the panel cover and replace the camera cover screws (2x). NOTE: Make sure rubber seal is firmly in place when replacing the panel cover. eLine Technology eLineTechnology.com... -
Page 35: Dimensions
Can’t connect to the camera on a web browser using local IP address: • See steps above. • Verify the camera’s local IP address using one of the methods listed in “4. Finding the Camera’s IP Address” on page 9. eLine Technology eLineTechnology.com... -
Page 36: Troubleshooting
• User accounts are locked when the password has been incorrectly entered 3 times. To unlock the account, login to the camera web interface as admin. Click Privilege Manager>User. Under User, select the locked user account and click Unlock to unlock the account. eLine Technology...